PHILCO PD 1466 CBIT Dishwasher
Water Supply And Drain
Cold water connection
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is fastened
tightly in place.
If the water pipes are new or have not been used for an extended period of time, let the water run to make
sure that the water is clear. This precaution is needed to avoid the risk of the water inlet to be blocked and
damage the appliance.
ordinary supply hose
safety supply hose
About the safety supply hose
The safety supply hose consists of the double walls. The system guarantees its intervention by blocking the
flow of water in case of the supply hose breaking and when the air space between the supply hose itself and
the outer corrugated hose is full of water.
WARNING
A hose that attaches to a tap can burst if it is installed on the same water line as the dishwasher. If your sink
has one, it is recommended that the hose be disconnected and the hole plugged.
How to connect the safety supply hose
1. Pull the safety supply hoses out from storage compartment located at rear of dishwasher.
2. Tighten the screws of the safety supply hose to the faucet with thread 3/4inch.
3. Turn the water fully on before starting the dishwasher.
How to disconnect the safety supply hose
1. Turn off the water.
2. Unscrew the safety supply hose from the faucet.
EN - 32
Copyright © 2023, Fast ČR, a. s.
Revision 05/2023
| General | Details |
|---|---|
| Name | PHILCO PD 1466 CBIT Dishwasher |
| Make | PHILCO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.69 MB |
(1 votes, average: 5.00 out of 5)
Loading...
PHILCO PD 1045 EA Dishwasher
BOSCH SHE3AR76UC Ascenta 24 Front Dishwasher
BOSCH SMS2ITI06X-60 Dishwasher
BOSH SBH4HVX00E Fully Integrated Dishwasher
FISHER PAYKEL DD60SCHX9 Dishwasher
IKEA TORSBODA Dishwasher
FISHER PAYKEL DD24SI9 N Sanitize Dishwasher
FISHER and PAYKEL DD60SDFX9 Contemporary Dishwasher
Westinghouse WSF6606 Dishwasher
ZLINE Classic Dishwasher
gorenje GV62040 Dishwasher