PHILCO PD 1466 CBIT Dishwasher
PART 8: TROUBLESHOOTING TIPS
Before Calling For Service
Reviewing the charts on the following pages may save you from calling for service.
Problem
Possible Causes
What To Do
Dishwasher doesn’t start.
Fuse blown, or the circuit
break tripped.
Replace fuse or reset circuit breaker.
Remove any other appliances sharing the
same circuit with the dishwasher.
Power supply is not turned
on.
Make sure the dishwasher is turned on and
the door is closed securely.
Make sure the power cord is properly
plugged into the wall socket.
Water pressure is low.
Check that the water supply is connected
properly and the water is turned on.
Door of dishwasher not
properly closed.
Make sure to close the door properly and
latch it.
Water not pumped form
dishwasher.
Twisted or trapped drain
hose.
Check the drain hose.
Filter clogged.
Check the filter system.
Kitchen sink clogged.
Check the kitchen sink to make sure it is
draining well. If the problem is the kitchen
sink that is not draining, you may need
a plumber rather than a serviceman for
dishwashers.
Foam in the tub.
Wrong detergent.
Use only the special dishwasher detergent
to avoid suds. If this occurs, open the
dishwasher and let suds evaporate. Add
1 liter of cold water to the bottom of the
dishwasher.
Close the dishwasher door, then select any
cycle. Initially, the dishwasher will drain out
the water. Open the door after draining
stage is complete and check if the suds
have disappeared.
Repeat if necessary.
Spilled rinse aid.
Always wipe up rinse aid spills immediately.
Stained tub interior.
Detergent with colourant
may have been used.
Make sure that the detergent has no
colourant.
EN - 39
Copyright © 2023, Fast ČR, a. s.
Revision 05/2023
| General | Details |
|---|---|
| Name | PHILCO PD 1466 CBIT Dishwasher |
| Make | PHILCO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.69 MB |

PHILCO PD 1045 EA Dishwasher






























































