SHARP SDW6506JS 24 Front Dishwasher
INSTALLATION INSTRUCTIONS
STEP 7: CONNECT TO POWER SUPPLY
DIRECT WIRE CABLE
NOTES:
• Use UL listed wire nuts of the appropriate size
to connect your household wiring to 16-gauge
dishwasher wiring.
WARNING
ELECTRICAL SHOCK HAZARD
• Insert wire ends into twist-on connector. Do
not pre-twist bare wire.
• Electrically ground dishwasher.
• Twist connector.
• Connect ground wire to green ground connector in
terminal box.
• Gently tug on wires to be sure both wires are
secured.
• Do not use an extension cord.
• Failure to follow these instructions can result in
death, fire or electrical shock.
Ground White
Black
IMPORTANT: Contact a qualified electrician. Be sure the electrical
connection and wire size are adequate and in conformance with the
National Electrical Code, ANSI/NFPA No. 70-latest edition and all
local codes and ordinances.
1 Confirm the power is turned off at the source.
2 Remove terminal box cover. Retain for later use.
3 Install a UL listed/CSA approved strain relief.
7 Tighten strain relief screws to secure the power cord.
8 Gently guide the wire nuts into the junction box then replace the
junction box cover making sure to not pinch the wires.
4 Route the direct wire cable in the channel on the right-hand side
of the dishwasher base. Make sure the dishwasher is not resting
on and/or pinching the wire.
CONNECT POWER CORD
5 Pull direct wire through strain relief in terminal box.
WARNING
ELECTRICAL SHOCK HAZARD
• Plug into a grounded 3 prong outlet.
• Do not remove the ground prong from the power
cord plug.
Strain relief
• Do not use an adapter.
• Do not use an extension cord.
• Failure to do so can result in death, fire or electrical
shock.
6 Connect the wires as follows using UL listed wire nuts of the
appropriate size to connect direct wire to 16-gauge dishwasher
wire.
IMPORTANT: The power cord and connections must comply with
the National Electrical Code, Section 422 and/or local codes and
ordinances. Recommended cord length is 54" to 64".
POWER SUPPLY WIRE
TERMINAL BOX WIRE
white
white
black
1 Confirm the power is turned off at the source.
2 Remove junction box cover. Retain for later use.
3 Install a UL listed/CSA approved strain relief.
black
ground wire
ground connector
4 Route power cord in the channel on the right-hand side of the
dishwasher base. Make sure the dishwasher is not resting on and/
or pinching the wire.
11
| General | Details |
|---|---|
| Name | SHARP SDW6506JS 24 Front Dishwasher |
| Make | Sharp |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.37 MB |
(1 votes, average: 5.00 out of 5)
Loading...
SHARP SDW6888JS Smart Dishwasher
SHARP QW-NA1BF47EI-EU Series Dishwasher
SHARP QW-NA24S42DI-EE Dishwasher
SHARP SDW6767HS Dishwasher
SHARP SDW6767HS Slide In Smart Dishwasher
SHARP SDW6767HS Smart Dishwasher
SHARP QW-NA26F39DI-EN Dishwasher
SHARP QW-NS1CF49EI-ES Dishwasher
SHARP SDW6757ES Dishwasher
SHARP QW-NA25GU44BS-DE Undercounter Dishwasher
