Home > VALBERG > VALBERG FBI16S43A 16 Dishwasher

VALBERG FBI16S43A 16 Dishwasher

Useful information  
Useful information  
C
C
Problem  
Possible causes  
What to do  
Problem  
Possible causes  
What to do  
• Use only the special  
• This has no influence on  
the dishwasher function. If  
in doubt, contact a qualified  
plumber.  
This may be caused by on-site  
installation or the cross-section  
of the piping.  
dishwasher detergent to avoid  
suds. If this occurs, open  
the dishwasher and let suds  
evaporate. Add 1 liter of cold  
water to the bottom of the  
dishwasher.  
Knocking noise in the water  
pipes  
The dishes were not loaded  
correctly.  
• See "Preparing And Loading  
Dishes".  
The program was not powerful  
enough.  
• Select a more intensive  
program.  
Wrong detergent.  
• Close the dishwasher door,  
then select any cycle. Initially,  
the dishwasher will drain out  
the water. Open the door after  
draining stage is complete  
and check if the suds have  
disappeared.  
Foam in the tub  
Not enough detergent was  
dispensed.  
• Use more detergent, or  
change your detergent.  
The dishes are not clean  
Items are blocking the  
movement of the spray arms.  
• Rearrange the items so that  
the spray can rotate freely.  
The filter combination is not  
clean or is not correctly fitted in • Clean and/or fit the filter  
• Repeat if necessary.  
the base of wash cabinet. This  
may cause the spray arm jets  
to get blocked.  
correctly. Clean the spray arm  
jets.  
• Always wipe up rinse aid  
spills immediately.  
Spilled rinse aid.  
• Use less detergent if you have  
soft water and select a shorter  
cycle to wash the glassware  
and to get them clean.  
Detergent with colourant may  
have been used.  
• Make sure that the detergent  
has no colourant.  
Stained tub interior  
Combination of soft water and  
too much detergent.  
Cloudiness on glassware.  
• To clean the interior, use  
the damp soft cloth with  
dishwasher detergent and wear  
rubber gloves. Never use any  
other cleaner than dishwasher  
detergent for the risk of  
foaming or suds.  
White spots appear on dishes  
and glasses.  
Hard water area can cause  
limescale deposits.  
• Check water softener settings  
or fill status of salt container.  
White film on inside surface  
Hard water minerals.  
Aluminium utensils have  
rubbed against dishes  
• Use a mild abrasive cleaner  
to eliminate those marks.  
Black or grey marks on dishes  
Detergent left in dispenser  
Dishes block detergent  
dispenser  
• Re-loading the dishes  
properly.  
• Avoid washing items that are  
not corrosion resistant in the  
dishwasher.  
The affected items are not  
corrosion resistant.  
• Always run a wash program  
without any crockery after  
adding salt. Do not select the  
Turbo function (if present), after  
adding dishwasher salt.  
A program was not run after  
There are rust stains on cutlery dishwasher salt was added.  
Traces of salt have gotten into  
the wash cycle.  
• Check the softener lid is  
secure.  
The lid of the softer is loose.  
• Interrupt the program and  
rearrange the items which are  
obstructing the spray arm.  
Knocking noise in the  
dishwasher  
A spray arm is knocking against  
an item in a basket  
• Interrupt the program,  
and rearrange the items of  
crockery.  
Rattling noise in the  
dishwasher  
Items of crockery are loose in  
the dishwasher.  
48  
EN  
49  
EN  
GeneralDetails
NameVALBERG FBI16S43A 16 Dishwasher
MakeVALBERG
LanguageEnglish
FiletypePDF (Download)
File size31.47 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
VALBERG SAD929C Dishwasher
VALBERG SAD929C Dishwasher
VALBERG 14S44 C XAD929C,14S44 C DXAD929C Dishwasher
VALBERG 14S44 C XAD929C,14S44 C DXAD929C Dishwasher
VALBERG VAL12C47SSC Dishwasher
VALBERG VAL12C47SSC Dishwasher
VALBERG 14S40 B WAD929C Dishwasher
VALBERG 14S40 B WAD929C Dishwasher
VALBERG XAD929C Dishwasher
VALBERG XAD929C Dishwasher

VALBERG FBI16S43A 16 Dishwasher