Home > VALBERG > VALBERG XAD929C Dishwasher

VALBERG XAD929C Dishwasher

Using the appliance  
B
WARNING  
A hose that attaches to a tap can burst if it is installed on  
the same water line as the dishwasher. If your sink has  
one, it is recommended that the hose be disconnected  
and the hole plugged.  
How to connect the safety supply hose  
1. Pull the safety supply hoses out from storage compartment located at rear of dishwasher.  
2. Tighten the screws of the safety supply hose to the faucet with thread 3/4inch.  
3. Turn the water fully on before starting the dishwasher.  
How to disconnect the safety supply hose  
1. Turn off the water.  
2. Unscrew the safety supply hose from the faucet.  
CONNECTION OF DRAIN HOSES  
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run into  
the sink, making sure to avoid bending or crimping it. The height of drain pipe must be less  
than 1000 mm. The free end of the hose must not be immersed in water to avoid the back  
flow of it.  
NOTE  
Please securely fix the drain hose in either position A or  
position B  
13  
EN  
GeneralDetails
NameVALBERG XAD929C Dishwasher
MakeVALBERG
LanguageEnglish
FiletypePDF (Download)
File size17.22 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
VALBERG SAD929C Dishwasher
VALBERG SAD929C Dishwasher
VALBERG 14S44 C XAD929C,14S44 C DXAD929C Dishwasher
VALBERG 14S44 C XAD929C,14S44 C DXAD929C Dishwasher
VALBERG VAL12C47SSC Dishwasher
VALBERG VAL12C47SSC Dishwasher
VALBERG 14S40 B WAD929C Dishwasher
VALBERG 14S40 B WAD929C Dishwasher
VALBERG FBI16S43A 16 Dishwasher
VALBERG FBI16S43A 16 Dishwasher

VALBERG XAD929C Dishwasher