Home > ZLINE Kitchen > ZLINE Kitchen DW7713 Classic Dishwasher
ZLINE Kitchen DW7713 Classic Dishwasher
INSTALLATION
6. When drilling a hole for the drain hose on the cabinet wall, use care not to damage the
hose by sharp edges of the hole. On wooden walls, use sand paper to soften the edges.
On metal walls, use insulation tape or duct tape to cover the sharp edges around the hole.
7. Also use care not the damage the drain hose when installing the dishwasher on the floor,
wall, or cabinet.
Step 10: Connecting the Drain Hose Continued
• To prevent leaks or drainage problems, make sure the drain hose is not damaged,
kinked, or twisted.
• Do not cut the corrugated area of the drain hose to fit the size. When arranging the drain
hose, use care to avoid contact with sharp edges of the cabinet or under-sink.
• Be careful when cutting the drain hose as there is a risk of injury. Clean
around the sink’s drain connection so that it does not damage the hose.
WARNING
Check for any foreign items in the drain hose and remove them.
• When arranging the drain hose, make sure the drain hose is not cut, torn, or
broken by any sharp edges of the floor, the product itself, or the cabinet. A
damaged drain hose causes a leak.
• When securing the hose to the sink connector, you must always use a hose
clamp. Failure to do so may cause water leakage.
• Lastly, secure the drain hose to the sink wall using cable ties or other fastening materials
(see Figure 14 below). Otherwise, the drain hose may bend at the end causing a drainage
problem or excessive supply of water.
Figure 13
Figure 14
20
| General | Details |
|---|---|
| Name | ZLINE Kitchen DW7713 Classic Dishwasher |
| Make | ZLINE Kitchen |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.07 MB |

ZLINE Kitchen DWMT Monument Dishwasher

ZLINE Kitchen DWV Tallac Dishwasher













































