Home > ZLINE Kitchen > ZLINE Kitchen DW7713 Classic Dishwasher
ZLINE Kitchen DW7713 Classic Dishwasher
INSTALLATION
Step 7: Placing the Dishwasher and Connecting the Hot Water Supply Line
1. Adjust the three leveling legs at the bottom of the dishwasher after measuring the height
of the cabinet opening from under the countertop to the floor (see "Step 8: Leveling the
Dishwasher" on page 16).
2. Locate the hot water supply line and the power cable.
3. Place the dishwasher so that the power cable is in the right channel of the base of the
dishwasher (see Figure 6). Use standard duct tape or cable ties to secure the electrical
cable to their adjacent channels in the base. This can prevent the electrical cable from
being squeezed when you push the dishwasher into place.
4. Pull the drain hose from the back of the dishwasher through the hole in the sink cabinet
side wall. Keep it free of kinks and fasten it to the drain hose connector of the sink (see
Figure 7). See Step 10: Connecting the Drain Hose, pages 18–20 , for more
information on connecting the drain hose.
5. Run the water line through the left channel of the base of the dishwasher and then connect
the hot water supply line to the 90° elbow joint.
6. Slide the dishwasher carefully into the installation space. If possible, gently pull any
excess lengths of water supply line, drain hose, or power cable back as you move the
dishwasher. Get a second or third person to help you do this if necessary.
Do not place the dishwasher on the water supply line, drain hose, or
power cable. Also, make sure they are not folded or twisted.
WARNING
Figure 6
Figure 7
15
| General | Details |
|---|---|
| Name | ZLINE Kitchen DW7713 Classic Dishwasher |
| Make | ZLINE Kitchen |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.07 MB |

ZLINE Kitchen DWV Tallac Dishwasher

ZLINE Kitchen DWMT Monument Dishwasher













































