Home > ZLINE Kitchen > ZLINE Kitchen DW7713 Classic Dishwasher

ZLINE Kitchen DW7713 Classic Dishwasher

INSTALLATION  
Step 8: Leveling the Dishwasher  
1. Open the door and place the level against the top of the tub on  
the inside and check if the dishwasher is level. If it is not level,  
rotate the leveling legs at the bottom front of the dishwasher until  
the dishwasher is level. See the first note below for instructions  
on adjusting the height of the front legs. Legs can be adjusted by  
roughly 1 3/4" (44 mm).  
2. Use the level to check if the dishwasher is level front to back, as  
shown at right. If the dishwasher is not level front to back, adjust the  
height of the rear legs until the dishwasher is level. See the second  
note below for the instructions on adjusting the rear legs.  
3. Open the door of the dishwasher and check if both the tub and  
door clearances are correct. You can also check this by placing a  
level against the inside front vertical surface of the tub.  
NOTES:  
1. Before you move the dishwasher for installation, make sure to adjust the height  
of the legs to be as short as possible. This prevents the legs from breaking.  
You can adjust the front legs by tilting the unit back and turning them easily  
clockwise or counter-clockwise.  
2. When adjusting the rear legs, don’t tilt the unit. Rather, you’ll want to use a  
flathead screwdriver or similar object to turn clockwise or counter-clockwise.  
Hold the front of the unit while adjusting to ensure stability.  
16  
GeneralDetails
NameZLINE Kitchen DW7713 Classic Dishwasher
MakeZLINE Kitchen
LanguageEnglish
FiletypePDF (Download)
File size1.07 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
ZLINE Kitchen DWV Tallac Dishwasher
ZLINE Kitchen DWV Tallac Dishwasher
ZLINE Kitchen DWMT Monument Dishwasher
ZLINE Kitchen DWMT Monument Dishwasher

ZLINE Kitchen DW7713 Classic Dishwasher