Home > ZLINE Kitchen > ZLINE Kitchen DW7713 Classic Dishwasher

ZLINE Kitchen DW7713 Classic Dishwasher

INSTALLATION  
Step 9: Securing the Dishwasher  
You must secure the dishwasher to the countertop or cabinet side walls for  
additional stability.  
• If the countertop is made of wood or a material that will not be damaged by drilling,  
follow the instructions in Option 1 below.  
• If the countertop is made of granite, marble, or any other material that can be damaged  
by drilling, follow the instructions in Option 2 below.  
Thoroughly clean the underside of the countertop where the  
dishwasher will go. Measure and cut the condensation strip to match  
the opening. Attach the condensation strip to the underside of the  
counter, close the front edge. This disperses the steam away from the  
edge of the dishwasher.  
1. Put a large towel into the bottom of the dishwasher to prevent wood shavings or a  
dropped screw from falling into the dishwasher. Carefully drill screw holes into the  
countertop bottom by passing the drill bit through a screw hole in each bracket, and then  
drilling into the countertop bottom beneath. Make sure the hole you drill is smaller than  
the diameter of the screw. Next, put the installation bracket into the slot of the side frame  
and tighten to the dishwasher with screw ST3.5*9. Then, insert the provided screws into  
the brackets and tighten to secure the dishwasher to the countertop. See Figure 8 on  
the next page.  
2. Put a large towel into the bottom of the dishwasher to prevent wood shavings or a  
dropped screw from falling into the dishwasher. Remove the adjustment cap with the  
tip of a screwdriver. The caps are just inside the tub near the middle an both sides (see  
Figure 9 on the next page). Carefully drill a hole into the sides of the kitchen cabinet on  
both sides through the screw holes exposed by the removal of the caps, and then drilling  
into the cabinet side beneath. Make sure the hole you drill is smaller than the diameter  
of the screw. Also make sure the drill bit does not strike the sides of the spacer cap holes.  
Scan to follow along with a video.  
17  
GeneralDetails
NameZLINE Kitchen DW7713 Classic Dishwasher
MakeZLINE Kitchen
LanguageEnglish
FiletypePDF (Download)
File size1.07 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
ZLINE Kitchen DWV Tallac Dishwasher
ZLINE Kitchen DWV Tallac Dishwasher
ZLINE Kitchen DWMT Monument Dishwasher
ZLINE Kitchen DWMT Monument Dishwasher

ZLINE Kitchen DW7713 Classic Dishwasher