Home > ZLINE Kitchen > ZLINE Kitchen DW7713 Classic Dishwasher

ZLINE Kitchen DW7713 Classic Dishwasher

INSTALLATION  
Step 11: Electrical Wiring Connections  
1. Before connecting the power cable to the dishwasher, make sure the circuit breaker is  
completely turned off.  
2. In the junction box located at the front bottom right of the dishwasher, find the three  
power wires from the dishwasher, including the green grounding line (Figure 15).  
3. Pass the power cable through the strain relief and into the junction box. Connect the  
black wire of the dishwasher to the black wire of the power cable by inserting both into  
a twist-on wire connector and then rotating until snug (Figure 16).  
4. Connect the white wire to the white wire and the green wire to the green wire in the same  
manner as Step 3.  
5. Recheck the wires to ensure they are connected correctly and securely. Each colored  
wire should be connected to the corresponding wire of the same color.  
6. Replace the junction box cover on the dishwasher.  
Figure 15  
Figure 16  
Electrical Shock Hazard  
To avoid electrical shock, do not work on an energized circuit. Doing so  
could result in serious injury or death. Only qualified electricians should  
perform electrical work. Do not attempt any work on the dishwasher’s  
electric supply circuit until you are certain power is disconnected.  
CAUTION  
Fire Hazard  
To avoid fire hazard, make sure electrical work is properly conducted.  
Only qualified electricians should perform electrical work.  
21  
GeneralDetails
NameZLINE Kitchen DW7713 Classic Dishwasher
MakeZLINE Kitchen
LanguageEnglish
FiletypePDF (Download)
File size1.07 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
ZLINE Kitchen DWV Tallac Dishwasher
ZLINE Kitchen DWV Tallac Dishwasher
ZLINE Kitchen DWMT Monument Dishwasher
ZLINE Kitchen DWMT Monument Dishwasher

ZLINE Kitchen DW7713 Classic Dishwasher