Home > ZLINE Kitchen > ZLINE Kitchen DW7713 Classic Dishwasher
ZLINE Kitchen DW7713 Classic Dishwasher
INSTALLATION
Step 10: Connecting the Drain Hose
1. Check the parts on the sink where the drain hose will be connected.
2. There are several ways to insert the drain hose into the drain hose connector of the sink,
as shown in Figure 11 below. You must connect the drain hose in accordance with the
drain pipe installation regulations in your region.
Figure 11
3. Check the size of the sink’s drain hose connector (7/8" / 22 mm) — as shown in Figure 13
on the next page). If the end of the drain hose does not fit onto the drain hose connector
of the sink, use an adapter purchasable at a plumbing/hardware supply store.
4. Slide a hose clamp over the end of the drain hose. Attach the drain hose to the sink
connector, slide the hose clamp to the end of the hose, and then tighten the hose clamp.
5. If there is no air gap, you can install a high loop. Hang the high point of the drain hose
as close as possible to the overflow level of the sink; this helps prevents backflow and
foul smells resulting from standing water. The high point should be at least 30” (762 mm)
from the cabinet floor, as outlined below in Figure 12.
Dishwasher
Sink
Drain Hose
Min. 30"
(762 mm)
Min. 20"
(508 mm)
Figure 12
19
| General | Details |
|---|---|
| Name | ZLINE Kitchen DW7713 Classic Dishwasher |
| Make | ZLINE Kitchen |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.07 MB |
(1 votes, average: 5.00 out of 5)
Loading...
ZLINE Kitchen DWV Tallac Dishwasher
ZLINE Kitchen DWMT Monument Dishwasher
GE GDF510PGR Plastic Interior Dishwasher
KitchenAid KDTF324PPA Dishwasher
FISHER PAYKEL DD60DAW9 Dishwasher
Omega ODWF4510X 45cm Compact Dishwasher
ASKO DFI7602MMXXL Dishwasher
NEFF S355HAX27G Dishwasher
KitchenAid KDTE304RBS Third Level Jet Rack Dishwasher
BOSCH SMS44DW01T Dishwasher
SIEMENS SX73HX10VE Dishwasher
INVENTUM VVW6008AW Dishwasher