AEG FSE63637P Dishwasher
Problem and alarm code
P
o
s
s
i
b
l
e
c
a
u
s
e
a
n
d
s
o
l
u
t
i
o
n
Technical malfunction of the appli‐
ance.
The display shows iC0 or iC3.
•
Switch the appliance off and on.
The level of water inside the appli‐
ance is too high.
The display shows iF1.
•
•
•
Switch the appliance off and on.
Make sure that the filters are clean.
Make sure that the outlet hose is installed at the right height above the
floor. Refer to the installation instruction.
The appliance stops and starts
more times during operation.
•
•
It is normal. It provides optimal cleaning results and energy savings.
The programme lasts too long.
If the delay start option is set, cancel the delay setting or wait for the
end of the countdown.
•
•
Activating options increases the programme duration.
The displayed programme duration
is different than the duration in the
consumption values table.
The pressure and the temperature of the water, the variations of the
mains supply, the options, the quantity of dishes and the degree of soil
can change the programme duration.
The remaining time in the display in‐
creases and skips nearly to the end
of the programme duration.
•
This is not a defect. The appliance is working correctly.
Small leak from the appliance door.
•
•
The appliance is not levelled. Loosen or tighten the adjustable feet (if
applicable).
The appliance door is not centred on the tub. Adjust the rear foot (if ap‐
plicable).
The appliance door is difficult to
close.
•
The appliance is not levelled. Loosen or tighten the adjustable feet (if
applicable).
•
•
Parts of the tableware are protruding from the baskets.
The appliance door opens during
the wash cycle.
The AirDry function is activated. You can deactivate the function. Refer
to Basic settings chapter.
Rattling or knocking sounds from
the inside of the appliance.
•
The tableware is not properly arranged in the baskets. Refer to basket
loading leaflet.
•
•
Make sure that the spray arms can rotate freely.
The appliance trips the circuit-beak‐
er.
The amperage is insufficient to supply simultaneously all the applian‐
ces in use. Check the socket amperage and the capacity of the meter
or turn off one of the appliances in use.
•
Internal electrical fault of the appliance. Contact an Authorised Service
Centre.
Once you have checked the appliance,
deactivate and activate the appliance. If the
problem occurs again, contact an Authorised
Service Centre.
WARNING!
We do not recommend using the
appliance until the problem has been
completely fixed. Unplug the appliance
and do not plug it in again until you are
certain that it operates correctly.
22 ENGLISH
| General | Details |
|---|---|
| Name | AEG FSE63637P Dishwasher |
| Make | AEG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.66 MB |
(1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
Miele PFD 104 SCVI XXL Dishwasher
medion DWT20 mini Dishwasher
Danby DDW621WDB Dishwasher
FRIGIDAIRE FFBD2406NB Full Console Dishwasher
Jackson DishStar LT Temperature Undercounter Dishwasher
ZLINE Monument Series 24 Red Matte Dishwasher
FISHER PAYKEL DD24SAX9N Single DishDrawer Dishwasher
FISHER AND PAYKEL DD24DI9 N Dishwasher
BOSCH SMS4ECW28E Dishwasher
BOSCH SMS6ZCI15E Dishwasher