Bauknecht AUTBFC3C26 Dishwasher
EN
LOADING THE RACKS
CUTLERY RACK
LOWER RACK
For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should
ideally be placed at the sides to avoid interferences with the spray arm.
The lower rack has tip-up supports which can be used in a vertical po-
sition when arranging plates or in a horizontal position (lower) to load
pans and salad bowls easily.
The third rack was designed to house the cutlery. Arrange the cutlery
as shown in the figure. A separate arrangement of the cutlery makes
collection easier after washing and improves washing and drying per-
formance.
Knives and other utensils with sharp edges must be positioned
with the blades facing downwards.
The geometry of the rack makes it possible to place such small items as
coffee cups in the area in the middle.
(loading example for the lower rack)
POWER CLEAN®
UPPER RACK
Load delicate and light dishes:
glasses, cups, saucers, low salad
bowls.
Power Clean® uses the special water jets
in the rear of cavity to wash more inten-
sively the high dirty items. The lower
rack has a Space Zone, a special pull-out
support in the rear of the rack that can
be used to support frying pans or baking
pans in upright position, thus taking up less space.
Placing the pots/casseroles faced to the Power Clean® component please
activate the POWER CLEAN® on
the panel.
(loading example for the upper
rack)
How to use Power Clean®:
1. Adjust the Power Clean® area G
folding down the rear plate hold-
ers to load pots.
2. Load pots and casseroles inclined
vertically in Power Clean® area.
Pots have to be inclined towards
the power water jets.
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper rack can be adjusted:
high position to place bulky crockery in the low-
er basket and low position to make the most of
the tip-up supports by creating more space up-
wards and avoid collision with the items loaded
into lower rack.
The upper rack is equipped with a Upper Rack
height adjuster (see figure), without pressing
the levers, lift it up by simply holding the rack
sides, as soon as the rack is stable in its upper po-
sition. To restore to the lower position, press the
levers A at the sides of the rack and move the basket downwards.
We strongly recommend that you do not adjust the height of the rack
when it is loaded.
CUTLERY BASKET
It is fitted with top grids for improved
cutlery arrangement. It must only be po-
sitioned at the front of the lower rack.
Knives and other utensils with sharp
edges must be placed in the cutlery
basket with the points facing down-
wards or they must be positioned hori-
zontally in the tip-up compartments on
the upper rack.
NEVER raise or lower the basket on one side only.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable flaps can be fold or
unfold to optimize the arrangement of
crockery inside the rack. Wine glasses
can be placed safely in the foldable flaps
by inserting the stem of each glass into
the corresponding slots.
2
3
GLASS CARE
Dedicated accessory that al-
lows you to safely store differ-
ent types of stem glasses in the
lower rack.
1
1
2
It enables cleaning & drying re-
sults by allowing an optimised
and stable positioning of the
glasses.
Depending on the model:
– to unfold the flaps there is needed to
slide it up and rotate or release it from
the snaps and pull it down.
3
B
A
– to fold the flaps there is needed to
rotate it and slide flaps down or pull it up and attach flaps to the snaps.
5
| General | Details |
|---|---|
| Name | Bauknecht AUTBFC3C26 Dishwasher |
| Make | Bauknecht |
| Language | English |
| Filetype | PDF (Download) |
| File size | 9.36 MB |

Bauknecht B7I HF60 Dishwasher

Bauknecht BK6UC11BS7A0X Dishwasher

BAUKNECHT 295f471f27d55b Dishwasher

Bauknecht Dishwasher

Bauknecht 3O35 PF Dishwasher

BAUKNECHT B2I HD526 A Dishwasher

Bauknecht BFP 5O41 PLT X Dishwasher





























