Home > CMA Dishmachines > CMA DISHMACHINES H-1X Undercounter Dishwasher
CMA DISHMACHINES H-1X Undercounter Dishwasher
Installation
Priming the Chemical Dispensing Pumps
! VERY IMPORTANT !
The chemical dispensing pumps must be primed before operating the
dishwasher and whenever the container is changed.
ON
PRIME
Fig.10
1. The chemical dispensing pump supply lines must be primed
before the will pump properly.
2. Make sure the containers are full and the correct pick-up tubes
are in their containers.
3. Turn the dishwasher power switch ON. The switch illuminates
and the machine fills with water.
4. Push and hold the prime push button DOWN to the R/A
Fig.11
(rinse-aid) position for thirty seconds until detergent is
observed entering the wash compartment from injection
fitting in the right rear of the tank. Release the push button
5. Open the dishwasher door, then push and hold the prime push
button, UP to the detergent position until detergent is
observed entering the wash compartment from the injection fitting
in the right rear of the tank. Release the button.
! VERY IMPORTANT !
INSPECT AND REPLACE THE CHEMICAL DISPENSING PUMP
SQUEEZE TUBES EVERY SIX MONTHS.
12
| General | Details |
|---|---|
| Name | CMA DISHMACHINES H-1X Undercounter Dishwasher |
| Make | CMA Dishmachines |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.97 MB |

CMA DISHMACHINES EST-44 Conveyor Dishwasher

CMA DISHMACHINES CMA-180UC Under Counter Dishwasher

CMA DISHMACHINES EST-AH Door Type Rack Low Dishwasher

CMA DISHMACHINES UC65e M3 Dishwasher

CMA DISHMACHINES CMA-180VL Dishwasher

CMA DISHMACHINES UC50e Dishwasher

CMA DISHMACHINES CMA-180 Dishwasher

CMA DISHMACHINES CMA-180UC Dishwasher

CMA DISHMACHINES 180UC-3 Under Counter Dishwasher

CMA DISHMACHINES AH Straight Thru Design Dishwasher

















































