GAGGENAU 400 Series Dishwasher
Top Mount is used for countertops made of wood or other
materials that can be easily drilled. Orient the mounting
brackets as shown in Figure 17 and position the two small
tabs on the mounting brackets over the two slots on the
dishwasher’s front corners. Push the mounting brackets
down firmly to insert the tabs into the slots. The difference
in Top Mount and Side Mount is the screw will be placed
and secured in different holes of the mounting bracket (refer
to “Securing the Dishwasher” section on the next page).
Installation of Rubber Drain Hose Adaptor
For a large port, use the drain hose as it is.
1. For a small port, insert the rubber drain hose adaptor
into the drain hose end.
2. Obtain the Rubber Drain HoseAdaptor (J) spring clamp
from the Dishwasher Installation Kit (do not substitute).
3. Insert the dishwasher drain hose into the end of the
drain hose (see Figure 15). Be sure to fully insert the
drain hose.
4. Use the clamp provided to attach the Rubber Drain Hose
Adaptor to the house plumbing as shown in Figure 16.
Side Mount is used for countertops made of marble,
granite, or other very hard materials that cannot be easily
drilled. Bend the mounting brackets along the small holes
and in the same direction as the two small tabs. Orient the
mounting brackets as shown in Figure 17 and position
the two small tabs on the mounting brackets over the two
slots on the dishwasher’s front corners. Push the mounting
brackets down firmly to insert the tabs into the slots. Bend
perforated edge down as shown.
J
Figure 15
Top and Side Mount
Figure 17
Figure 16
C
G
Alternate Side Mount for opening 235/8″ (600 mm). Insert
a side mount force distributor (M) in each side as shown in
Figure 18.
Installation of Mounting Brackets
M
Before installing the supplied countertop mounting
brackets, decide which method of securing the
dishwasher into its enclosure will be used. Once the
mounting brackets are installed on the dishwasher,
removing them is difficult and will damage the
mounting brackets and the dishwasher.
M
M
Figure 18
Alternate Side Mount
The dishwasher can be secured into its enclosure in 3 ways:
NOTE: If your dishwasher opening width measures >235/8″
(600 mm) use the TOP or SIDE MOUNT mounting methods.
If your dishwasher opening width measures 235/8″ (600 mm)
use the ALTERNATE SIDE MOUNT mounting method.
12
| General | Details |
|---|---|
| Name | GAGGENAU 400 Series Dishwasher |
| Make | Gaggenau |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.09 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Gaggenau DF264101 Dishwasher
GAGGENAU DF271101F Dishwasher
GAGGENAU DF481100 Dishwasher
GAGGENAU 400 Dishwasher
GAGGENAU DF480161F Dishwasher
Gaggenau 9001923384 B Dishwasher
GAGGENAU DF261101 Dishwasher
Gaggenau DF211700 Dishwasher
GAGGENAU DF480701F Dishwasher
GAGGENAU DF481100F 400 Series Dishwasher
Bosch 041203 Active Water Dishwasher
BOSCH SHS53C Dishwasher
Simpson 52C850SK Dishwasher
BOSCH SMS2HKW03E Dishwasher
Electrolux EEG58600LX Built Under Dishwasher
Adexa WST5A6WTWL Commercial Mini Dishwasher
Whirlpool W11389327B Portable Dishwasher
BOSCH SRI4HKS53E 45cm 4 Partial Dishwasher
AEG FFB75707PM Dishwasher
Bosch SMV4HTX00G Fully Integrated Dishwasher