ggmgastro GLOZ50 Undercounter Dishwasher
4.7 Loading Detergents and Rinse-Aid:
Chemical pumps are located on the back side of the front panel (OPTIONAL). Disconnect the appliance before removing
any panel. A plastic hose is available for each chemical pump. There are hose outlets on the back side of the appliance.
Attach the weights provided with the appliance to the ends of the chemical hose. Then, position the weight at the
hose end below the chemical drum. Always make sure to attach the detergent hose and the rinse aid hose to the right
container. (Rinse aid hose to the rinse aid drum, detergent hose to the detergent drum)
Attention: Only use chemicals suitable for industrial washing or glass washing. Rinse aid should be suitable for
temperatures below 40°C as well.
4.7.1 Detergent & Rinse-Aid Amount:
Detergent pump dosage and rinse aid pump dozage is set in factory. However, depending on actual water hardness at
the place of installation, chemical dosage may be re-set on the Touch screen adjustment menu.
Chemical pumps are located right on the back of the front bottom panel (OPTIONAL).
Note: At start-up, bleed excess air in the hoses. Because, in the first use, washing should not be done without
chemical. Remove the water outlet plug and run the machine (water intake process) until it is filled with chemicals in
the hoses. Then the water outlet plug should be placed for the washing process.’’
4.8 Washing and Rinsing Water Temperatures
Water temperatures can be adjusted. During production, our appliance is set to the following temperature values. The
temperature should not be set higher than these temperatures.
ALL
Models:
Rinsing Water Temp.(Boiler)
Washing Water Temp.(Tank)
85°C
55°C
10
| General | Details |
|---|---|
| Name | ggmgastro GLOZ50 Undercounter Dishwasher |
| Make | ggmgastro |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.76 MB |

ggmgastro DSHI1080WD Dishwasher





































