Indesit 869991713220 Dishwasher
EN
CARE AND MAINTENANCE
CLEANING THE FILTER ASSEMBLY
CLEANING THE SPRAY ARMS
Regularly clean the filter assembly so that the filters do not clog and that On occasions, food residue may become encrusted onto the spray arms
the waste water flows away correctly.
and block the holes used to spray the water. It is therefore recommend-
ed that you check the arms from time to time and clean them with
a small non-metallic brush.
Using dishwasher with clogged filters or foreign objects inside filtration
system or sprayarms may cause unit malfunction resulting in lose of
performance, noisy work or higher resources usage.
The filter assembly consists of three filters which remove food residues
from the washing water and then recirculate the water.
The dishwasher must not be used without filters or if the filter is
loose.
At least once per month or after each 30 cycles, check the filter assem-
bly and if necessary clean it thoroughly under running water, using
a non-metallic brush and following the instructions below:
To remove the upper spray arm, turn the plastic locking ring in a clock-
wise direction. The upper spray arm should be replaced so that the side
with the greater number of holes is facing upwards.
1. Turn the cylindrical filter A in an anti-clockwise direction and pull it
out (Fig 1).
2. Remove the cup filter B by exerting a slight pressure on the side
flaps (Fig 2).
3. Slide out the stainless-steel plate filter C (Fig 3).
4. In case you find foreign objects (such as broken glass, porcelain,
bones, fruit seeds etc.) please remove them carefully.
5. Inspect the trap and remove any food residues. NEVER REMOVE
the wash-cycle pump protection (black detail) (Fig 4).
The lower spray arm may be removed by pulling it upwards.
1
2
WATER SOFTENING SYSTEM
B
Water softener automatically reduces water hardness, consequently
preventing scale buildup on heater, contributing also to better cleaning
efficiency.
A
A
This system regenerates itself with salt, therefore it is required to
refill salt container when empty.
Frequency of regeneration depends on water hardness level setting
- regeneration takes place once per 5 Eco cycles with water hardness
level set to 3.
Regeneration process starts in final rinse and finishes in drying phase,
before cycle ends.
•
•
•
Single regeneration consumes: ~3.5L of water;
Takes up to 5 additional minutes for the cycle;
Consumes below 0.005kWh of energy.
C
3
4
After cleaning the filters, re-place the filter assembly and fix it in posi-
tion correctly; this is essential for maintaining the efficient operation of
the dishwasher.
CLEANING THE WATER INLET HOSE
If the water hoses are new or have not been used for an extend-
ed period of time, let the water run to make sure it is clear and free
of impurities before performing the necessary connections. If this
precaution is not taken, the water inlet could become blocked and dam-
age the dishwasher.
7
| General | Details |
|---|---|
| Name | Indesit 869991713220 Dishwasher |
| Make | INDESIT |
| Language | English |
| Filetype | PDF (Download) |
| File size | 6.26 MB |
(1 votes, average: 5.00 out of 5)
Loading...
INDESIT D2I HL326 Full Size Dishwasher
Indesit D2F HD624 A Separate Dishwasher
INDESIT I0F D641A X Free Standing Dishwasher
Indesit I0F D641A Dishwasher
INDESIT DFE 1B19 14 Dishwasher
INDeSIT D2F Dishwasher
INDeSIT D2I HD524 A Dishwasher
INDESIT W11667630 B Dishwasher
InDeSIT IN2FE10CS90S Dishwasher
inDeSIT DSIO3M24CS Dishwasher
BOSCH SMD8YCX01G Fully- Dishwasher
SIEMENS SN13EW78CS Dishwasher
BOSCH SMV4HCX58E-39 Dishwasher
FISHER PAYKEL DW60UNT4B2 Tall Built-under Dishwasher
STRLING STR-DWSS14 Dishwasher
FISHER PAYKEL DD60DAW9 Dishwasher
AEG FSE75748P Dishwasher
BOSCH SMS4HKW00G Dishwasher
BOSCH SMV6ZB803E Dishwasher
BOSCH SMV6ZCX07E 6 Total Dishwasher