Indesit 869991713220 Dishwasher
TROUBLESHOOTING
In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list.
For other errors or issues please contact authorized After-sales Service which contact details can be found in the warranty booklet.
Spare parts will be available for a period of either up to 7 or up to 10 years, according to the specific Regulation requirements.
PROBLEMS POSSIBLE CAUSES
SOLUTIONS
Salt indicator
is lit
Salt reservoir is empty. (After refill the salt indicator Refill reservoir with salt (for more information - see page 2).
may remain lit for several wash cycles).
Adjust water hardness - see table, page 2.
The appliance has not been plugged in properly.
Insert the plug into the socket.
For safety reasons, dishwasher will not restart automatically when power returns.
Press the START/Pause button to resume the cycle.
Power outage.
The dishwasher
won’t start or does The dishwasher door is not closed.
Vigorously push the door until you hear the “click”.
Close the door and press START/Pause.
not respond to
Cycle is interupted by door opening for > 4 sec.
commands.
Switch off the appliance by pressing the ON/OFF button, switch it back on after
approximately one minute and restart the program. If problem persists, unplug
the appliance for 1 minute, then plug it back in.
It does not respond to commands.
The wash cycle has not finished yet.
Wait until the wash cycle finishes.
The drain hose is bent.
Check that the drain hose is not bent (see INSTALATION INSTRUCTION).
Clean the sink drain pipe.
The dishwasher
won’t drain.
The sink drain pipe is blocked.
The filter is clogged up with food residues.
Clean the filter (see CLEANING THE FILTER ASSEMBLY).
The dishes are rattling against each other.
Position the crockery correctly (see LOADING THE RACKS).
The dishwasher
makes
excessive noise.
The detergent has not been measured out correctly or it is not suitable for use
in dishwashers (see FILLING THE DETERGENT DISPENSER). Restart dishwasher by
pressing the DRAIN button (see OPTIONS AND FUNCTIONS) and run new program
without detergent.
An excessive amount of foam has been produced.
The crockery has not been arranged properly.
Arrange the crockery correctly (see LOADING THE RACKS).
Arrange the crockery correctly (see LOADING THE RACKS).
Select an appropriate wash cycle (see PROGRAMS TABLE).
The spray arms cannot rotate freely, being hindered
by the dishes.
The wash cycle is too gentle.
The dishes are not
clean.
The detergent has not been measured out correctly or it is not suitable for use in dish-
washers (see FILLING THE DETERGENT DISPENSER).
An excessive amount of foam has been produced.
The cap on the rinse aid compartment has not been
shut correctly.
Make sure the cap of the rinse aid dispenser is closed.
The filter is soiled or clogged.
There is no salt.
Clean the filter assembly (see CARE AND MAINTENANCE).
Fill the salt reservoir (see FILLING THE SALT RESERVOIR).
Make sure there is water in the water supply or the tap running.
No water in the water supply or the tap is closed.
The dishwasher
does not fill the wa-
ter.
Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwasher
and reboot.
The inlet hose is bent.
All LEDs are
blinking rapidly.
The sieve in the water inlet hose is clogged; it is
necessary to clean it.
After having carried out the verification and cleaning, turn off and turn on the dish-
washer and restart a new program.
Drain hose positioned too low or siphoning into
home sewage system.
Check if end of drain hose is placed at correct height (see INSTALLATION). Check
for siphoning into home sewage system, install air admittance valve if necessary.
Dishwasher finishes
the cycle prema-
turely.
Air in water supply.
Check water supply for leaks or other issues letting air inside.
Depends on the liquid detergent used and can be
emphasized in case of delay option is activated.
Small leaks will not cause machine malfunction and can be avoided by changing
liquid detergent type or using tablets.
Detergent leaks.
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
•
•
•
Using QR code on your product.
Visiting our website docs.indesit.eu and parts-selfservice.europeanappliances.com
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our
After-sales Service, please state the codes provided on your product‘s identification plate.
The model information can be retrieved using the QR-Code reported in the energy label. The label also includes
IEC 436
:
8
| General | Details |
|---|---|
| Name | Indesit 869991713220 Dishwasher |
| Make | INDESIT |
| Language | English |
| Filetype | PDF (Download) |
| File size | 6.26 MB |
(1 votes, average: 5.00 out of 5)
Loading...
INDESIT D2I HL326 Full Size Dishwasher
Indesit D2F HD624 A Separate Dishwasher
INDESIT I0F D641A X Free Standing Dishwasher
Indesit I0F D641A Dishwasher
INDESIT DFE 1B19 14 Dishwasher
INDeSIT D2F Dishwasher
INDeSIT D2I HD524 A Dishwasher
INDESIT W11667630 B Dishwasher
InDeSIT IN2FE10CS90S Dishwasher
inDeSIT DSIO3M24CS Dishwasher
SAMSUNG DW80CB5450 Dishwasher
CANDY CDIH 2L952-80 Dishwasher
BOSCH SMV6ECX51E Dishwasher
Haier HDW13F0W1 Hygiene Dishwasher
FISHER PAYKEL DD24SI9 N Integrated Single Dishwasher
JennAir QQSCHIB Dishwasher
BOSCH SMS6ECI03E Dishwasher
FISHER PAYKEL DD60ST4NX9 Built-Under Dishwasher
Bosch SMI4IKS50T Dishwasher
FRIGIDAIRE FFCD2413US Dishwasher