InDesiT D2I HD526 Dishwasher

1

2

Quick Guide  

EN  

THANK YOU FOR BUYING AN INDESIT PRODUCT.  

In order to receive a more complete assistance, please register  

your appliance on: www.indesit.com/register  

PLEASE SCAN THE QR CODE ON YOUR  

APPLIANCE IN ORDER TO HAVE MORE  

DETAILED INFORMATION  

Before using the appliance carefully read Safety Instructions  

guide.  

CONTROL PANEL  

1. On-Off/Reset button with indicator light  

2. Program selection button  

3. Salt refill indicator light  

4. Rinse Aid refill indicator light  

5. Program number and delay time indicator  

6. Tablet (Tab) indicator light  

1

2

3

4

5

6

7

8

9

10  

7. Display  

9. Delay button  

10. START/Pause button with indicator light/ Tablet (Tab)  

8. Push&GO button  

FIRST TIME USE  

FILLING THE SALT RESERVOIR  

FILLING THE DETERGENT DISPENSER  

The use of salt prevents the formation of LIMESCALE on the dishes and on To open the detergent dispenser use the opening device C. Introduce the  

the machine’s functional components.  

It is mandatory that THE SALT RESERVOIR NEVER BE EMPTY.  

It is important to set the water hardness.  

The salt reservoir is located in the lower part of the dishwasher  

(see PRODUCT DESCRIPTION) and must be filled when the SALT REFILL  

detergent into the dry dispenser D only. Place the amount of detergent for  

pre-washing directly inside the tub.  

The detergent dispenser automatically opens up at the right time  

according to the program.  

If all-in-one detergents are used, we recommend using the TABLET button,  

because it adjusts the program so that the best washing and drying results  

are always achieved.  

Usage of detergent not designed for dishwashers may cause malfunc-  

tion or damage to the appliance.  

•

•

indicator light  

in the control panel is lit.  

1. Remove the lower rack and unscrew the reservoir cap  

(anticlockwise).  

2. Only the first time you do this: fill the salt reservoir  

with water.  

3. Position the funnel (see figure) and fill the salt reservo-  

ir right up to its edge (approximately 1 kg); it is not  

unusual for a little water to leak out.  

WATER SOFTENING SYSTEM  

Water softener automatically reduces water hardness, consequently pre-  

venting scale buildup on heater, contributing also to better cleaning efficiency.  

This system regenerates itself with salt, therefore it is required to refill  

salt container when empty.  

Frequency of regeneration depends on water hardness level setting - regen-  

eration takes place once per 6 Eco cycles with water hardness level set to 3.  

Regeneration process starts in final rinse and finishes in drying phase, be-  

fore cycle ends.  

4. Remove the funnel and wipe any salt residue away from the opening.  

Make sure the cap is screwed on tightly, so that no detergent can get into  

the container during the wash program (this could damage the water so-  

ftener beyond repair).  

Whenever you need to add salt, it is mandatory to complete the  

procedure before the beginning of the washing cycle to avoid corrosion.  

•

•

•

Single regeneration consumes: ~3.5L of water;  

Takes up to 5 additional minutes for the cycle;  

Consumes below 0.005kWh of energy.  

FILLING THE RINSE AID DISPENSER  

Rinse aid makes dish DRYING easier. The rinse  

aid dispenser A should be filled when the  

RINSE AID REFILL indicator light  

control panel is lit.  

NEVER pour the rinse aid directly into the  

appliance tub.  

in the  

D

C

A

PROGRAMS TABLE  

Duration  

Water  

Energy  

Available  

options ^*)  

of wash  

program  

(h:min)^**)  

Program  

Programs description  

consumption consumption  

(litres/cycle)  

9.5  

(kWh/cycle)  

Eco 50°- Eco program is suitable to clean normally soiled tableware,  

that for this use, it is the most efficient program in terms of its com-  

bined energy and water consumption, and that it is used to assess  

compliance with the EU Ecodesign legislation.  

1.  

2.  

3:35  

2:40  

0.95  

Intensive 65° - Program recommended for heavily soiled crocke-  

ry, especially suitable for pans and saucepans (not to be used for  

delicate items).  

18.0  

1.60  

Mixed 55° - Mixed soil. For normally soiled dishes with dried food re-  

sidues.  

3.  

4.  

5.  

6.  

2:15  

0:28  

3:35  

2:00  

16.0  

9.0  

1.40  

0.50  

1.30  

1.50  

Fast&Clean 28’ 50° - Program to be used for half load of lightly-so-  

iled dishes with no dried food residues. Does not have drying phase.  

-

Night 50°- Suitable for night-time operation of the appliance.  

Ensures optimal cleaning and drying performance with the lowest  

noise emission.  

16.6  

12.0  

Extra Hygiene 65°- Normally or heavily soiled crockery, with additional  

antibacterial wash. Can be used to perform maintenance of the dishwa-  

sher.  

Prewash - Use to refresh crockery planned to be washed later. No  

detergent to be used with this program.  

7.  

8.  

9.  

0:12  

0:50  

1:30  

4.7  

0.01  

0.80  

1.30  

-

-

Self Clean 65°- Program to be used to perform maintenance of the  

dishwasher, to be carried out only when the dishwasher is EMPTY  

using specific detergents designed for dishwasher maintenance.  

10.0  

11.5  

Push&GO 50° - Everyday wash and dry cycle that ensures great cleaning  

performance in a short time without the need to pre-treat dishes.  

1

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	InDesiT D2I HD526 Dishwasher
Make	INDESIT
Language	English
Filetype	PDF (Download)
File size	1.51 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• INDESIT

InDesiT D2I HD526 Dishwasher Overview

Summary of Contents

• Page 1: Quick guide Thank you for buying an Indesit product. Before using the appliance carefully read safety instructions guide. Control panel includes various buttons such as On-Off/Reset, program selection, and START/Pause. Filling the salt reservoir is mandatory and prevents limescale formation. The salt reservoir must never be empty. It is important to set the water hardness. Rinse aid makes dish drying easier and should be filled when the Rinse Aid Refill indicator light is lit. Never pour the rinse aid directly into the appliance tub. The Eco program is suitable for normally soiled tableware and is the most efficient in terms of energy and water consumption. The Intensive program is recommended for heavily soiled crockery, especially pans and saucepans.
• Page 2: ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020. Pre-treatment of the dishes is not needed before any of the programs. Not all options can be used simultaneously. Values given for programs other than the program Eco are indicative only. The start of the program may be delayed for a period of time between 1 and 12 hours. Push&GO button allows direct access to the Push&GO program, a wash and dry cycle that ensures great cleaning performance in a short time. The cutlery basket should be positioned only at the front of the lower rack. Knives and other utensils with sharp edges must be placed in the cutlery basket with the points facing downwards. To remove the upper spray arm, turn the plastic locking ring in a clockwise direction. In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list.