Indesit I0F D641A Dishwasher

1

2

3

4

5

6

7

8

Quick Guide  

EN  

THANK YOU FOR BUYING AN INDESIT PRODUCT.  

In order to receive a more complete assistance, please  

register your appliance on: www.indesit.com/register  

PLEASE SCAN THE QR CODE ON YOUR  

APPLIANCE IN ORDER TO HAVE MORE  

DETAILED INFORMATION  

Before using the appliance carefully read the Safety Instruction.  

CONTROL PANEL  

1. On-Off / Reset button with  

indicator light  

7. Tablet (Tab) indicator light  

8. Closed water tap indicator  

light  

2. Program selection button with  

indicator light  

9. Rinse Aid refill indicator light  

3. Multizone button with indicator 10. Salt refill indicator light  

light / Tablet (Tab)  

4. Eco program indicator light  

5. Display  

11. Push&GO button with  

indicator light  

12. Delay button with indicator light  

1

3

4

5

6

7

8

9

10 11  

12  

13  

2

6. Program number and remaining 13. Start/Pause button with indicator light / Drain out  

time indicator  

FIRST TIME USE  

FILLING THE SALT RESERVOIR  

FILLING THE DETERGENT DISPENSER  

The use of salt prevents the formation of LIMESCALE on the dishes and on To open the detergent dispenser use the opening device C. Introduce the  

the machine’s functional components.  

detergent into the dry dispenser D only. Place the amount of detergent for  

pre-washing directly inside the tub.  

If all-in-one detergents are used, we recommend using the TABLET button,  

•

•

It is mandatory that the salt reservoir never be empty.  

It is important to set the water hardness.  

The salt reservoir is located in the lower part of the dishwasher and must be because it adjusts the program so that the best washing and drying results  

filled when the SALT REFILL indicator light in the control panel is lit.  

are always achieved.  

1. Remove the lower rack and unscrew the reservoir cap Usage of detergent not designed for dishwashers may cause malfunc-  

(anticlockwise).  

tion or damage to the appliance.  

2. Position the funnel (see figure) and fill the salt reservoir  

right up to its edge (approximately 1 kg); it is not unu-  

sual for a little water to leak out.  

3. Only the first time you do this: fill the salt reservoir  

with water.  

WATER SOFTENING SYSTEM  

Water softener automatically reduces water hardness, consequently pre-  

venting scale buildup on heater, contributing also to better cleaning effi-  

ciency. This system regenerates itself with salt, therefore it is required  

to refill salt container when empty.  

4. Remove the funnel and wipe any salt residue away from the opening.  

Make sure the cap is screwed on tightly, so that no detergent can get into the  

container during the wash program (this could damage the water softener be-  

yond repair). Whenever you need to add salt, it is mandatory to complete  

the procedure before the beginning of the washing cycle to avoid corrosion.  

Frequency of regeneration depends on water hardness level setting - regen-  

eration takes place once per 6 Eco cycles with water hardness level set to 3.  

Regeneration process starts in final rinse and finishes in drying phase, be-  

fore cycle ends.  

•

•

•

Single regeneration consumes: ~3.5L of water;  

Takes up to 5 additional minutes for the cycle;  

Consumes below 0.005 kWh of energy.  

FILLING THE RINSE AID DISPENSER  

Rinse aid makes dish DRYING easier. The  

rinse aid dispenser A should be filled when  

D

C

the RINSE AID REFILL indicator light  

in  

the control panel is lit.  

NEVER pour the rinse aid directly into the  

appliance tub.  

A

PROGRAMS TABLE  

Duration  

Water  

Energy  

Available  

options ^*)  

of wash  

program  

(h:min)^**)  

Program  

Programs description  

consumption consumption  

(litres/cycle) (kWh/cycle)  

Eco 50°- Program is suitable to clean normally soiled tableware, that for  

this use, it is the most efficient programme in terms of its combined ener-  

gy and water consumption, and that it is used to assess compliance with  

the EU Ecodesign legislation.  

3:10  

9.5  

0.75  

1.  

Auto Intensive 65°- Automatic program for heavily soiled dishes and  

pans (not to be used for delicate items).  

2:00 - 3:10 14.0 - 17.0  

1:30 - 2:30 14.5 - 16.0  

1.50 - 1.85  

1.15 - 1.30  

1.20  

2.  

3.  

4.  

5.  

6.  

7.  

Auto Mixed 55° - Automatic program for normally soiled pans and dishes.  

Glass 45° - Program for delicate items, which are more sensitive to high tem-  

peratures, for example glasses and cups.  

1:40  

0:28  

3:30  

0:12  

12.0  

9.0  

Fast&Clean 28’ 45° - Program to be used for half load of lightly-soiled  

dishes with no dried food residues. Without drying.  

0.50  

-

Night 50° - Suitable for night-time operation of the appliance. Ensures opti-  

mal cleaning and drying performance with the lowest noise emission.  

16.0  

4.5  

1.15  

Prewash - Use to refresh crockery planned to be washed later. No deter-  

gent to be used with this program.  

0.01  

-

-

-

Self- Clean 65° - Program to be used to perform maintenance of the dish-  

washer, to be carried out only when the dishwasher is EMPTY using specific  

detergents designed for dishwasher maintenance.  

0:50  

1:25  

8.0  

0.85  

1.10  

8.  

9.  

-

Push&GO 50° - Everyday wash and dry cycle that ensures great cleaning  

performance in a short time without the need to pre-treat dishes.  

11.5  

1

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Indesit I0F D641A Dishwasher
Make	INDESIT
Language	English
Filetype	PDF (Download)
File size	6.68 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• INDESIT

Indesit I0F D641A Dishwasher Overview

Summary of Contents

• Page 1: Thank you for buying an Indesit product. In order to receive more complete assistance, please register your appliance. Before using the appliance, carefully read the safety instruction. The use of salt prevents the formation of limescale on the dishes and on the machine’s functional components. It is mandatory that the salt reservoir never be empty. The salt reservoir must be filled when the salt refill indicator light is lit. Rinse aid makes dish drying easier. Never pour the rinse aid directly into the appliance tub. The Eco program is suitable to clean normally soiled tableware and is the most efficient program in terms of energy and water consumption. The Auto Intensive program is for heavily soiled dishes and pans.
• Page 2: Quick Guide ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020. Pre-treatment of the dishes is not needed before any of the programs. Not all options can be used simultaneously. The actual time may vary depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options, and sensor calibration. The start of the program may be delayed for a period of time between 0:30 and 24 hours. The DELAY function cannot be set once a wash cycle has been started. Auto Door is a convection drying system which automatically opens the door during/after the drying phase to ensure exceptional drying performance. Push&GO program ensures great cleaning performance in a short time. Capacity: 14 standard place-settings. Cleaning the filter assembly and spray arms is essential for maintenance.
• Page 3: Guide rapide Merci d’avoir choisi un produit Indesit. Avant d’utiliser l’appareil, lisez attentivement les consignes de sécurité. Panneau de commande : comprend des touches pour marche-arrêt, sélecteur de programme, multizone, et d'autres fonctions. Première utilisation : remplir le distributeur de détergent et le réservoir de sel régénérant. L’utilisation de sel régénérant empêche la formation de calcaire sur la vaisselle et les composants de l’appareil. Le réservoir de sel doit être rempli lorsque le voyant de niveau de sel est allumé. Le liquide de rinçage permet à la vaisselle de sécher plus facilement. Ne jamais verser le liquide de rinçage directement dans la cuve. Tableau des programmes : le programme Eco est adapté pour nettoyer la vaisselle normalement sale. Le programme Auto Intensif est pour la vaisselle et casseroles très sales.
• Page 4: Guide rapide Programme Auto-Nettoyant 65° pour l'entretien du lave-vaisselle, à réaliser uniquement lorsque le lave-vaisselle est vide. Programme Push&GO 50° pour un lavage et cycle de séchage quotidiens sans nécessité de prétraiter la vaisselle. Les données du programme Éco sont mesurées sous des conditions en laboratoire conformément à la norme européenne EN 60436:2020. Les options ne peuvent pas toutes être utilisées en même temps. La fonction de demi-charge permet d'économiser de l'eau, de l'électricité et du détergent. Le programme différé peut être réglé entre 30 minutes et 24 heures. Auto Door ouvre automatiquement la porte pendant/après la phase de séchage pour une performance de séchage exceptionnelle. Le bouton Push&GO permet d'accéder directement au programme Push&GO. Le panier inférieur comprend des supports rabattables pour faciliter le chargement. Nettoyer l'ensemble filtre et les bras d'aspersion régulièrement pour un fonctionnement optimal.
• Page 5: Guide rapide Dépannage Problèmes Merci de scanner le QR code sur votre appareil pour obtenir des informations plus détaillées. Causes possibles Solutions L’eau n’arrive pas au lave-vaisselle. L’afficheur indique : F6 et les voyants Marche/arrêt et Démarrer/Pause clignotent rapidement. L’alimentation d’eau est vide ou le robinet est fermé. Le lave-vaisselle termine le cycle prématurément. L’afficheur indique : F15 et les voyants Marche/arrêt et Démarrer/Pause clignotent rapidement. Vérifiez si l’extrémité du tuyau de vidange est placée à la hauteur correcte. De l’air est présent dans l’alimentation en eau. Vous trouverez les documents normatifs, la documentation standard, le classement des pièces de rechange et des informations supplémentaires sur les produits. Lorsque vous contactez notre Service après-vente, veuillez indiquer les codes figurant sur la plaque signalétique de l’appareil.
• Page 6: Guia rápido Obrigado por ter adquirido um produto Indesit. Leia as instruções de segurança com atenção antes de usar o aparelho. Painel de comandos inclui botões para ligar/desligar, seleção de programas, multizone, e indicadores luminosos. É obrigatório que o depósito de sal nunca esteja vazio. O depósito de sal deve ser enchido quando o indicador luminoso de reabastecimento do sal estiver aceso. O descalcificador de água reduz automaticamente a dureza da água, evitando a acumulação de calcário. O abrilhantador facilita a secagem da loiça e deve ser enchido quando o indicador luminoso de reabastecimento do abrilhantador se acender. O programa Eco é ideal para lavar loiça com um nível de sujidade normal, sendo o mais eficiente em termos de energia e água. O programa Auto Intensivo é para loiça e tachos muito sujos, não devendo ser utilizado para objetos frágeis. O programa de limpeza automática deve ser utilizado apenas quando a máquina estiver vazia e com detergentes específicos para manutenção.
• Page 7: Guia Rápido Duração do programa Consumo de água Consumo de energia Opções Descrição dos programas disponíveis Não é necessário efetuar qualquer tipo de pré-tratamento da loiça antes de iniciar os programas. Se uma opção não for compatível com o programa selecionado, o LED correspondente pisca rapidamente 3 vezes. Se a carga de loiça a lavar seja reduzida, poderá ser utilizado o programa de meia carga. O início do programa poderá ser diferido, num período entre 0:30 e 24 horas. Auto Door é composto por um sistema de secagem por convecção que abre automaticamente a porta durante/após o ciclo de secagem. O botão Push&GO permite acesso direto ao programa Push&GO, um ciclo de lavagem e secagem. O cesto inferior tem suportes rebatíveis, que podem ser utilizados numa posição vertical ou horizontal. Carregue neste cesto a loiça frágil e leve: copos, chávenas, pires, tigelas. Para retirar o braço aspersor superior, rode o anel de bloqueio de plástico no sentido dos ponteiros do relógio.
• Page 8: Guia rápido Efetue a leitura do código QR no seu aparelho para obter informações mais detalhadas. Resolução de problemas Não há abastecimento de água ou a torneira está fechada. Certifique-se de que há água ou que a torneira está aberta. A máquina de lavar loiça não se enche de água. A mangueira da entrada está dobrada. O filtro da mangueira de entrada de água está obstruído; é necessário limpá-lo. A máquina de lavar loiça termina o ciclo prematuramente. Verifique se existem fugas de água ou outros problemas que causem a entrada de ar. As políticas da empresa, documentação padrão, encomenda de peças sobresselentes e informações adicionais sobre o produto poderão ser consultadas. Utilize o código QR no seu produto. Ao contactar o nosso Serviço Pós-Venda, indique os códigos fornecidos na placa de identificação do seu produto.