Home > KitchenAid > KitchenAid KDSDM82143 Dishwasher

KitchenAid KDSDM82143 Dishwasher

Installation ............................................................................................................................................ 4  
Product description .............................................................................................................................. 5  
First time use ......................................................................................................................................... 6  
Advice and tips ..................................................................................................................................... 8  
Loading the racks ................................................................................................................................ 8  
Selecting a cycle and options ..............................................................................................................10  
Cycle table ........................................................................................................................................... 11  
Options and settings .......................................................................................................................... 12  
Settings menu .................................................................................................................................... 13  
Care and maintenance ....................................................................................................................... 14  
Troubleshooting .................................................................................................................................. 15  
After-sales service ............................................................................................................................. 17  
3
Before using the appliance carefully read Health and Safety guide.  
INSTALLATION  
ATTENTION: If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.  
CONNECTING THE WATER SUPPLY  
Adaptation of the water supply for installation should only be perfor-  
med by a qualified technician.  
ELECTRICAL CONNECTION  
WARNING: Under no circumstances should the water inlet hose  
be cut as it contains live electrical parts.  
The water inlet and outlet hoses may be positioned towards the right  
or the left in order to achieve the best possible installation.  
Make sure the dishwasher does not bend or squash the hoses.  
Before inserting the plug into the electrical socket, make sure that:  
• The socket is earth and complies with current regulations;  
• The socket can withstand the maximum load of the appliance as  
shown on the data plate located on the inside of the door (see  
PRODUCT DESCRIPTION).  
CONNECTING THE WATER INLET HOSE  
• Run the water until it is perfectly clear.  
• Screw the inlet hose tightly into position and turn on the tap.  
If the inlet hose is not long enough, contact a specialist store or an  
authorised technician.  
• The power supply voltage falls within the values indicated on the  
data plate on the inside of the door.  
• The socket is compatible with the plug of the appliance.  
If this is not the case, ask an authorised technician to replace the plug  
(see AFTER-SALES SERVICE). Do not use extension cables or multiple  
sockets. Once the appliance has been installed, the power supply  
cable and the electrical socket should be easily accessible.  
The cable should not be bent or compressed.  
The water pressure must be within the values indicated in the Techni-  
cal Data table - otherwise the dishwasher may be function properly.  
Make sure the hose is not bent or compressed.  
SPECIFICATIONS FOR THE CONNECTION OF THE WATER SUPPLY HOSE:  
WATER SUPPLY  
WATER INTAKE  
cold or hot (max. 60°C)  
3/4”  
If the power supply cable is damaged, have it replaced by the ma-  
nufacturer or its authorised Technical Assistance Service in order to  
prevent all potential hazards.  
0,05 ÷ 1 MPa (0.5 ÷ 10 bar)  
7,25 – 145 psi  
POWER OF WATER PRESSURE  
The Company shall not be held responsible for any incidents, if these  
regulations are not observed.  
POSITIONING AND LEVELLING  
CONNECTING THE WATER OUTLET HOSE  
Connect the outlet hose to a drain duct with a minimum diameter of  
2 cm A.  
The outlet hose connection must be at a height ranging from 40 to  
80 cm from the floor or surface where the dishwasher rests.  
Before connecting the water outlet hose to the sink drain, remove the  
plastic plug B.  
1. Position the dishwasher on a level sturdy floor. If the floor is uneven,  
the front feet of the appliance may be adjusted until it reaches  
a horizontal position. If the appliance is levelled correctly, it will be  
more stable and much less likely to move or cause vibrations and  
noise while it is operating.  
2. Before recessing the dishwasher, stick the adhesive transparent strip  
under the wooden shelf in order to protect it from any condensation  
which may form.  
ANTI-FLOODING PROTECTION  
Anti-flooding protection. To ensure floods do not occur, the dishwasher:  
- is provided with a special system which blocks the water supply in  
the event of anomalies or leaks from inside the appliance.  
Some models are also equipped with the supplementary safety device  
New Aqua Stop, which guarantees anti-flooding protection even in  
the event of a supply hose rupture.  
3. Place the dishwasher so that its sides or back panel are in contact  
with the adjacent cabinets or the wall. This appliance can also be  
recessed under a single worktop.  
4. To adjust the height of the rear foot, turn the red hexagonal bushing  
on the lower central part at the front of the dishwasher using a  
hexagonal spanner with an opening of 8 mm. Turn the spanner in  
a clockwise direction to increase the height and in an anticlockwise  
direction to decrease it.  
Under no circumstances should the water inlet hose be cut as it conta-  
ins live electrical parts.  
DIMENSIONS AND CAPACITY:  
WIDTH  
595 mm  
MAX 80 cm  
MIN 40 cm  
HEIGHT  
DEPTH  
820 mm  
555 mm  
CAPACITY  
14 standard place-settings  
4
GeneralDetails
NameKitchenAid KDSDM82143 Dishwasher
MakeKitchenAid
LanguageEnglish
FiletypePDF (Download)
File size1.99 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
KitchenAid KDTE304RBS Third Level Jet Rack Dishwasher
KitchenAid KDTE304RBS Third Level Jet Rack Dishwasher
KitchenAid KDTF324PPA Dishwasher
KitchenAid KDTF324PPA Dishwasher
Kitchenaid MVWC565FW1 Dishwasher
Kitchenaid MVWC565FW1 Dishwasher
KitchenAid w11323304 Dishwasher
KitchenAid w11323304 Dishwasher
KitchenAid KDFE104KWH Two Rack Dishwasher
KitchenAid KDFE104KWH Two Rack Dishwasher
KitchenAid KDTE104KPS Dishwasher
KitchenAid KDTE104KPS Dishwasher
KitchenAid KDFE104KBL Front Dishwasher
KitchenAid KDFE104KBL Front Dishwasher
KitchenAid KDTF924PPS Flush Cabinet Dishwasher
KitchenAid KDTF924PPS Flush Cabinet Dishwasher
KitchenAid KDTE304RBS Level Jet Rack Dishwasher
KitchenAid KDTE304RBS Level Jet Rack Dishwasher
KitchenAid KDF Series Dishwasher
KitchenAid KDF Series Dishwasher

KitchenAid KDSDM82143 Dishwasher