LG LDPS6762D PrintProof Black Smart Dishwasher
us_main.book.book Page 11 Tuesday, July 5, 2022 1:32 PM
INSTALLATION 11
least 0.1” (2 mm) between the dishwasher and
the cabinet sides.
WARNING
• Installation damage is not covered by the
warranty, and leaks caused by improper
installation may result in property damage.
• If installing the dishwasher in a corner, leave a
minimum of 2” (50 mm) between the dishwasher
and the adjacent wall.
• Do not use existing holes unless they are in the
target area.
• The adjacent wall must be free of obstructions.
• For flush installations only, you may remove the
cabinet brace a inside the cabinet.
• Failure to properly locate the hole for the water
and drain lines may prevent the dishwasher
from installing flush with the cabinets and could
result in kinked, pinched, crushed, stressed or
damaged lines.
Choosing the Proper Location
1
Select a location as close to the sink as
possible for easy connections to water supply
line, drain hose and electrical connection.
Preparing Water and
Electrical Connections
WARNING
• Water Connection
- Do not reuse an old hose. Use only a new hose
when installing the dishwasher. The old hose
could leak or burst causing flooding and
property damage. Contact an LG Customer
Information Center for assistance in buying a
new hose.
• Electrical Connection
- Use a time-delay fuse or circuit breaker.
2
To allow for proper clearance of plumbing
and electrical, use the template included with
the literature to determine the clearance on
the side of the cabinet where the cabinet
meets the back wall. Using a 2 1/2” diameter
hole saw, drill a hole in the target area as
shown on the template.
- Operate this appliance with the correct voltage
as shown in this manual and on the rating
plate.
- The wiring must be grounded properly. If in
doubt, have it checked by a qualified
electrician.
- Connect the appliance using 3-wires, including
a ground wire.
- The appliance and outlet must be positioned
so that the plug is easily accessible.
3.5 ''
2.5 ''
- Do not use an extension cable or adapter with
this dishwasher.
4
''
- Do not overload the outlet with more than one
appliance.
- The included 16AWG wire nuts should be used.
| General | Details |
|---|---|
| Name | LG LDPS6762D PrintProof Black Smart Dishwasher |
| Make | LG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.74 MB |

LG LDTH7972SS Black Dishwasher

LG SDWB24S3 STUDIO Smart Dishwasher

LG LDTH7972D Smart Tub Dishwasher

LG LDPH7972D Smart Dishwasher

LG XD3A25UMB 15 Place QuadWash Dishwasher

LG LDT779 Dishwasher

LG LDT7808BD Dishwasher

LG LDFN4542S Dishwasher

LG DFB424 Dishwasher

LG LDTS5552D PrintProof Black Dishwasher


























