LG XD3A25UMB 15 Place QuadWash Dishwasher
17
INSTALLATION
Case 3
Installing the Drain Hose
If the end of the drain hose does not fit to the drain
line, use a drain extension kit (optional) that is
resistant to heat and detergent.
The custom Kick Plate is connected, and the
dishwasher is in the middle of the kitchen
cabinet. (Using the brackets is not required.)
ꢀ
This should be available from a plumbing shop
or a hardware store.
Connection to the Waste Spigot
Check the waste spigot when initially installing. An
OE error can occur when the waste spigot below
the sink is not drilled out properly. To connect the
drain hose, drill out at least a 15 mm diameter hole
in the waste spigot before connecting and
securing.
NOTE
ꢀ
If necessary, trim the custom Kick Plate to avoid
interfering with the door opening action.
CAUTION
ꢀ
ꢀ
Make sure that plastic debris is not remaining
inside of spigot after it has been drilled out.
Do not attempt to open the waste hole with a
screwdriver and hammer. This will induce debris
to become stuck and cause a malfunction.
ꢀ
Caution should be taken when passing hoses
through Cabinetry holes as they may have sharp
edges and could damage the hoses. Smooth or
sand edges to avoid damaging the drain or inlet
hose.
= d(≥20)
Max 60 mm
ꢀ
ꢀ
Make sure that the line is not kinked or sharply
bent.
Make sure the drain hose is straight before
feeding the end of it through the hole for the
water supply.
To prevent siphoning, one of the following
methods must be used.
| General | Details |
|---|---|
| Name | LG XD3A25UMB 15 Place QuadWash Dishwasher |
| Make | LG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.23 MB |

LG LDTH7972SS Black Dishwasher

LG SDWB24S3 STUDIO Smart Dishwasher

LG LDTH7972D Smart Tub Dishwasher

LG LDPH7972D Smart Dishwasher

LG LDT779 Dishwasher

LG LDT7808BD Dishwasher

LG LDFN4542S Dishwasher

LG DFB424 Dishwasher

LG LDTS5552D PrintProof Black Dishwasher

LG LDPH7972S Smart Dishwasher





































































