Home > LORD > lord D8 Dishwasher

lord D8 Dishwasher

Water Supply And Drain  
Cold water connection  
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure  
that it is fastened tightly in place. If the water pipes are new or have not been used for  
an extended period of time, let the water run to make sure that the water is clear. This  
precaution is needed to avoid the risk of the water inlet to be blocked and damage the  
appliance.  
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ  
ordinary supply hose  
safety supply hose  
About the safety supply hose  
The safety supply hose consists of the double walls. The hose‘s system guarantees its  
intervention by blocking the ꢃow of water in case of the supply hose breaking and  
when the air space between the supply hose itself and the outer corrugated hose is full  
of water.  
WARNING  
A hose that attaches to a sink spray can burst if it is installed on the same water line as  
the dishwasher. If your sink has one, it is recommended that the hose be disconnected  
and the hole plugged.  
How to connect the safety supply hose  
1. Pull The safety supply hoses completely out from storage compartment located at  
rear of dishwasher.  
2. Tighter the screws of the safety supply hose to the faucet with thread 3/4inch.  
3. Turn water fully on before starting the dishwasher.  
How to disconnect the safety supply hose  
1. Turn oꢁ the water.  
2. Unscrew the safety supply hose from the faucet.  
16  
GeneralDetails
Namelord D8 Dishwasher
MakeLORD
LanguageEnglish
FiletypePDF (Download)
File size24.44 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
lord D5 Dishwasher
lord D5 Dishwasher
lord D1000 Dishwasher
lord D1000 Dishwasher
lord D3 Dishwasher
lord D3 Dishwasher

lord D8 Dishwasher