Miele PFD 400 Dishwasher
en - Installation notes
Installation notes
For safe installation and commissioning of the dishwasher please
read the installation plan, the service documentation and the oper-
ating instructions.
This installation plan includes the dimensions of the appliance, the
technical data and the requirements to be met on site for the installa-
tion of the dishwasher.
Installation
requirements
This dishwasher must only be installed and commissioned by the
Miele Customer Service Department, a Miele authorised dealer or a
suitably qualified specialist.
Installation should only be performed in accordance with valid reg-
ulations, relevant standards and health and safety codes.
Environmental
requirements
Condensate can build up in the area surrounding the dishwasher. Any
furniture and fittings in the room must therefore be suitable for pur-
pose.
Protective sheet
for built-under
appliances
The protective sheet supplied protects the worktop from damage
caused by steam escaping when the door is opened. Fit the protect-
ive sheet above the door, underneath the worktop.
Electrical
connection
All work on the electrical connection must be carried out by the Miele
Customer Service Department, an authorised Miele dealer or a quali-
fied electrician.
Plug connection
Hard-wired
The dishwasher should be connected to the electricity supply via a
socket.
If the dishwasher is hard-wired to the power supply, a power switch
capable of disconnecting the dishwasher at all poles must be in-
stalled on site. This power switch must have a contact gap of at least
3 mm.
The socket and the power switch must be accessible after the appli-
ance has been installed. An electrical safety test must be carried out
after installation and after any servicing work.
The mains connection cable must be laid protected from the risk of
thermal damage.
Residual current
device (RCD)
For increased safety, it is recommended to protect the dishwasher
with a residual current device (RCD) with a trip current of 30 mA.
Equipotential
bonding
There is a screw connection point for equipotential bonding at the
back of the dishwasher.
Equipotential bonding should be carried out if possible on site.
18
| General | Details |
|---|---|
| Name | Miele PFD 400 Dishwasher |
| Make | Miele |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.54 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Miele PFD 103 SCi XXL XXL Dishwasher
Miele PFD 101 i Dishwasher
Miele AK-CC 550A APFD 102 Dishwasher
Miele PFD 102 APFD 102 Dishwasher
Miele 11 836 740 Dishwasher
Miele PFD 401 U Commercial Dishwasher
Miele PLW 8683 Laboratory Dishwasher
Miele PFD 100 SmartBiz Free-Standing Dishwasher
Miele 12 668 930 Dishwasher
Miele PFD 102 i Dishwasher
FISHER and PAYKEL DD60ST4HNB9 Contemporary Tall Dishwasher
TECO TDW09WAM Dishwasher
SAMSUNG DW9000F Dishwasher
Bauknecht B7I HF60 Dishwasher
GE APPLIANCES PDT705SYWFS Dishwasher
FISHER and PAYKEL DD24SCTB9_N Dishwasher
BOSCH SMV4EAX24E Dishwasher
BOSCH SPV2HKX41E Dishwasher
BOSCH SBH4ITX12E Dishwasher
KitchenAid KUDS24SEWH2 Dishwasher