MONOGRAM CDT845P4NW2 Interior Dishwasher
Dishwasher Installation
PUSH DISHWASHER
LEVEL DISHWASHER
STEP 12
STEP 11
(CONT.)
INTO FINAL POSITION
(CONT.)
ꢀ Remove the lower dish
rack and place a level on
the door and lower rack
track as shown in figure.
ꢀ Open and close the dishwasher door to be sure it
operates smoothly, and does not rub on the adjacent
cabinet.
Tip: Prevent unnecessary service charges for
panel damage or wash performance.
Check dishwasher alignment prior to opening
dishwasher door to prevent panel damage.
Make sure utility lines are not trapped or crushed behind
dishwasher. Crushed lines will restrict water flow.
Figure U
If your model has a rear leveling system, the rear height
is adjusted from the front of the dishwasher along with the
2 front legs on the bottom of the dishwasher. Begin the
leveling process with the front legs by individually turning the
front 2 legs. Adjust the front legs first. When the front legs
are adjusted to a height resulting in an appropriate gap to
the upper cabinet, proceed to adjust the rear leveling system
by adjusting the leveling bolt as illustrated in the figure.
Turn the bolt to adjust the rear leveling system. Slowly rotate
the bolt clockwise to raise the back of the dishwasher, and
counterclockwise to lower it. Continue to adjust the feet until
the dishwasher is level as illustrated in the figure. Ensure all 3
legs are firmly in contact with the floor.
Door
Fits and
Swings
Back
Behind
Cabinet
Frame
B
Correct
Alignment
Incorrect Alignment
Door Catches
will result in door damage
on Cabinet Frame
If the trim interferes with the
door it may be tucked in as
an alternate installation
Check that trim does not
contact the door at all points
Turn front
leg to adjust
front height
Turn leveling system
bolt to adjust rear height
Turn front
leg to adjust
front height
Tub
frame
Tub
Trim
tucked
in
If your model has 4 leveling feet, adjust the
level of the dishwasher by individually turning
the 4 legs on the bottom of the dishwasher
as shown in figure.
frame
Cabinet
Cabinet
Door
Top
Trim
Door
Top
View
View
ꢀ The dishwasher is properly leveled when the level indicator is
centered left to right and front to back. Also, the dishwasher
door should close without hitting the side of the tub.
Handle
Handle
Tub trim may be trimmed if necessary to ensure proper door operation
ꢀ Replace the lower rack.
Tip: Prevent unnecessary service charges. Verify
dishwasher is leveled.
LEVEL DISHWASHER
STEP 12
Pull the dish racks half way out. They should stay put. Open
and close the door. The door should fit in the tub opening
without hitting the side of the tub. If the racks roll on their
own, or the door hits the side of tub, re-level the dishwasher.
IMPORTANT – Dishwasher must be level for proper dish
rack operation, wash performance and door operation. The
dishwasher must be leveled left to right and front to back.
This ensures the dish racks will not roll in or out on their own,
circulation water will flow to the pump inlet, and the door will
close without hitting the side of the tub.
18
| General | Details |
|---|---|
| Name | MONOGRAM CDT845P4NW2 Interior Dishwasher |
| Make | MONOGRAM |
| Language | English |
| Filetype | PDF (Download) |
| File size | 33.22 MB |
(1 votes, average: 5.00 out of 5)
Loading...
MONOGRAM UDT165SIVII 18 Inch Dishwasher
MONOGRAM ZDT925SINII Dishwasher
MONOGRAM ZDT985SINII Dishwasher
MONOGRAM ZDT985SINII Fully Integrated Dishwasher
centerline CDH-1 51 Racks Hour Door Type Dishwasher
FISHER PAYKEL DD24DTX6PX1 Tall
Whirlpool W8I-HP42-L-UK Dishwasher
BOSCH SMS4HMI07E-30 Dishwasher
BOSCH SPS4HMW49G Dishwasher
BOSCH SMS4ECW28E Dishwasher
ARDESTO DWMB-V459SMT3 Dishwasher
FISHER AND PAYKEL DD60DTX6I1 Dishwasher
beko BDUN Dishwasher
BOSCH SMS46DI00M Dishwasher