MONOGRAM CDT845P4NW2 Interior Dishwasher
Dishwasher Installation
CONNECT DRAIN LINE
(CONT.)
CONNECT DRAIN LINE
STEP 15
STEP 15
(CONT.)
ꢀ Determine size of inlet port. If required, cut drain hose
connector on the marked line, to fit the inlet port.
NOTE: TOTAL DRAIN HOSE LENGTH MUST NOT
EXCEED 16’ FROM THE REAR OF THE DISHWASHER
Cutting Line
FOR PROPER DRAIN OPERATION.
IMPORTANT: Do not cut
corrugated portion of hose.
Hose Clamp
ꢀ If a longer drain hose is required and your model
looks like one of these:
ꢀ Connect drain line to air gap, waste tee or disposer
using the previously determined method. Secure
hose with a hose clamp.
Method 1 – Air gap with waste tee or disposer
72”
max.
72”
max.
Replace the provided user bag drain hose with
GE Appliances service part WD24X10065, a 12’ long
hose which can be connected directly to the drain loop
already attached to the unit.
ꢀ If a longer drain hose is required and your model
looks like this:
Waste Tee Installation
Disposer Installation
Method 2 – “High drain loop” with waste tee or
disposer
With this method you will need the drain hose hanger
set aside earlier.
Fasten drain hose to underside of countertop with the
provided hanger.
You can purchase an extension drain hose -
Drain Hose Hanger
Drain Hose Hanger
GE Appliances service part WD24X10062 (4’ length)
or WD24X10065 (12’ length) which can be connected
directly to the drain hose already attached to the unit.
To use the extension, you must cut the drain hose
provided with the unit as shown. Use a hose cutter or
razor blade knife to cut the drain hose.
32” min. -
32” min. -
72” max.
18”
72” max.
18”
min.
min.
Cut Line
To use the 4’ drain
hose extension:
Waste Tee Installation
Disposer Installation
Only cut at this
location
Drain Hose on
Dishwasher
IMPORTANT – When connecting drain line to
disposer, check to be sure that drain plug has been
removed. DISHWASHER WILL NOT DRAIN IF PLUG
IS LEFT IN PLACE.
House
Dishwasher
Connection
To use the 12’ drain hose extension:
Only cut ONE of these two locations
Remove
Drain
Plug
If service part hose is not available, an additional hose
with coupler, ID of 5/8” or 7/8” and no longer than 66”,
may be attached to the provided user bag drain hose.
Secure the connection with hose clamp (obtain locally)
to the provided user bag drain hose.
Tip: Avoid unnecessary service call charges for a
no drain complaint.
Make sure excess drain hose has been pulled through
the cabinet opening. This will prevent excess hose
in the dishwasher cavity from becoming kinked or
crushed by the dishwasher.
Hose Clamp
Coupler
Hose Clamp
20
| General | Details |
|---|---|
| Name | MONOGRAM CDT845P4NW2 Interior Dishwasher |
| Make | MONOGRAM |
| Language | English |
| Filetype | PDF (Download) |
| File size | 33.22 MB |
(1 votes, average: 5.00 out of 5)
Loading...
MONOGRAM UDT165SIVII 18 Inch Dishwasher
MONOGRAM ZDT925SINII Dishwasher
MONOGRAM ZDT985SINII Dishwasher
MONOGRAM ZDT985SINII Fully Integrated Dishwasher
Thermador DWHD660EFM Dishwasher
IKEA 004.754.18 DISKAD Integrated Dishwasher
BOSCH SMS6ZCI00G Dishwasher
SIEMENS SX75Z802BE Fully Integrated Dishwasher
BOSCH SHE53C85SS 300 Series Dishwasher
FISHER and PAYKEL DD24STX6PX1 DishDrawer Sanitize Dishwasher
beko DUT25401WHW Front Pocket Handle Dishwasher
Whirlpool WDT740SALB Dishwasher
FISHER AND PAYKEL DD24DTX6I Dishdra Wertm Dishwasher
FISHER and PAYKEL DW24U6I1 Sanitize Dishwasher