Home > Town Appliance > Town Appliance W11711835A Dishwasher

Town Appliance W11711835A Dishwasher

12. Adjust leveling legs  
15. Slide nut and ferrule onto tubing (copper  
tubing only)  
A
B
Refer to the “Dishwasher Height Adjustment Chart” for height  
of leveling legs needed for your cabinet opening.  
A. Nut  
B. Ferrule  
13. Remove plastic rail cover  
Copper tubing only: Put the tubing into the 90° elbow fitting  
as far as it will go. (The copper tubing bends and kinks  
easily.) Slide the nut and ferrule forward and start the nut  
onto the elbow threads.  
A
NOTE: To avoid vibration during operation, route the water  
supply line so that it does not touch the dishwasher base,  
frame, or motor. Go to step 18.  
16. Flexible line  
A. Plastic rail cover  
Remove and discard the plastic rail cover on each side of the  
dishwasher frame. To remove the plastic rail cover, push  
upward and back to unsnap it from the dishwasher frame.  
Connect Water Line to Fill Valve  
– For Copper Line, begin with step 14.  
– For Flexible Line, begin with step 16.  
14. Copper water line  
Flexible braided line: Confirm the flexible braided line is  
long enough.  
17. Add 90° elbow fitting to the water supply line  
If using copper tubing, measure overall length of copper  
tubing required to reach the water supply, cut to length, and  
attach with compression fittings.  
Get 3/8" (9.5 mm) compression x 3/4" (19 mm) hose fitting  
with 90° elbow. See the “Tools and Parts” section at the front  
of the guide for part details and order. Connect the 3/8"  
(9.5 mm) compression fitting of the 90° elbow fitting to the  
water supply line. Attach so the 3/4" (19 mm) connection is  
facing upward as shown above.  
12  
 
GeneralDetails
NameTown Appliance W11711835A Dishwasher
MakeTown Appliance
LanguageEnglish
FiletypePDF (Download)
File size14.45 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Town Appliance W11711835A Dishwasher