Home > Town Appliance > Town Appliance W11711835A Dishwasher

Town Appliance W11711835A Dishwasher

Countertop Attachment:  
39. Install bracket  
37. Insert bracket  
A
A. Bend tabs  
Push bracket into slot on the side of dishwasher and bend  
tab in toward the side of the dishwasher so that it keeps the  
bracket in place. Repeat this step for the other side of the  
dishwasher.  
NOTE: Install wood shims to the inside of the cabinets if the  
gap between the sides of the cabinet and the sides of the  
dishwasher are greater than 1/2" (13 mm) on each side.  
NOTE: Tabs must point to the right.  
Remove the brackets from the package and insert into the  
open slots on the left- and right-hand top of the dishwasher  
collar as shown. Go to step 42.  
Bend tab  
NOTE: Do not attach the dishwasher. This will be done later.  
Final Installation Check  
40. Open and close door  
Using pliers, bend/twist tab to lock the brackets in place.  
Side Attachment:  
38. Break end of bracket  
41. Closes too quickly – decrease spring tension  
A
B
A. Scored line for stainless steel tub models  
B. Scored line for plastic tub models  
Break off the end of the bracket along the scored line using  
pliers.  
If the door closes too quickly, decrease the spring tension by  
moving the spring end toward the front of the dishwasher.  
NOTE: Springs should be in the same notches on left and  
right sides.  
17  
 
GeneralDetails
NameTown Appliance W11711835A Dishwasher
MakeTown Appliance
LanguageEnglish
FiletypePDF (Download)
File size14.45 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Town Appliance W11711835A Dishwasher