Home > Town Appliance > Town Appliance W11711835A Dishwasher
Town Appliance W11711835A Dishwasher
31. Stand dishwasher upright
34. Secure installation blanket
A
B
Using 2 or more people, stand the dishwasher up.
NOTE: Do not install kick plate until instructed to do so.
A. Insulation blanket
B. Secure blanket
NOTE: Make sure insulation blanket is secured at both left
and right rear corners before pushing into cabinet opening to
keep the blanket from bunching up in a tight-fitting cabinet.
IMPORTANT: If wheels were removed, cover the floor when
moving the dishwasher. Slowly move dishwasher completely
into cabinet opening. Do not kink or pinch water line, drain
hose, power cord, or direct wire between dishwasher and
cabinet. Remove cardboard from under dishwasher.
35. Move dishwasher all but 6" (152 mm) into
cabinet opening
It is all right if dishwasher fits tightly into cabinet opening. Do
not remove insulation blanket—the blanket reduces the
sound level.
6"
(152 mm)
NOTE: Route water supply, drain hose, and power cord out
the rear of the dishwasher.
32. Move dishwasher close to cabinet opening
A
NOTE: Leave unit about 6" (152 mm) out from cabinet in
order to install anchor brackets and adjust door tension if
needed.
36. Pull slack from utilities
B
C
A. Water line
B. Cable
C. Drain hose
Route the utilities through the holes in the cabinet and pull
the slack out at the same time as the dishwasher is pushed
into the cabinet.
33. Route power cord.
NOTE: Pull slack out of utilities at the same time the
dishwasher is pushed into the cabinet opening to avoid any
kinks.
Choose Anchor Attachment Method
IMPORTANT: The dishwasher must be secured to the cabinet as
one of the final steps. Prepare the dishwasher for this by attaching
the 2 brackets found in the parts bag to the dishwasher.
– For countertops that are wood, laminate, or another similar
surface, use Countertop Attachment: go to step 37.
– For countertops that are marble, granite, or another hard
surface, use Side Attachment: go to step 38.
If using a power cord, make sure to route end through hole in
cutout before sliding dishwasher into cabinet opening.
NOTE: If the gap between the top of the door and the underside of
the countertop is tight (less than 1/4" [6.35 mm]), we suggest
using Side Attachment to keep from scratching the User Interface
or console with the anchor screws.
NOTE: Care shall be exercised, when the appliance is
installed or removed, to reduce the likelihood of damage to
the power-supply cord.
16
| General | Details |
|---|---|
| Name | Town Appliance W11711835A Dishwasher |
| Make | Town Appliance |
| Language | English |
| Filetype | PDF (Download) |
| File size | 14.45 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Haier HDW13F0S1 Dishwasher
FORTE F18DWS450PR Dishwasher
BOSCH SMV4HMX65Q Dishwasher
FISHER PAYKEL DD24DHTI9 N Dishwasher
FISHER AND PAYKEL DD24DI9 Dishwasher
smeg DI13M2 Dishwasher
FISHER PAYKEL DW60FC1X1 Dishwasher
DD24DAX9 N Contemporary Dishwasher
FISHER PAYKEL DD24DHTI9 N Integrated Double Dishwasher
Kenmore W10898468B Ultra WashTMHE Dishwasher