Home > Town Appliance > Town Appliance W11711835A Dishwasher

Town Appliance W11711835A Dishwasher

59. Power supply cord – Plug into a grounded 3  
prong outlet  
63. Tighten fasteners  
A
B
C
Plug into a grounded 3-prong outlet.  
A. Unlocked  
B. Locked  
C. 1/4 turn  
60. Reconnect power  
Using a flat-blade screwdriver, turn the fasteners 1/4 turn  
clockwise to lock into place. The fastener slot will be straight  
up and down when properly locked. Go to step 66.  
Reconnect electrical power at the fuse box or circuit breaker  
box.  
NOTE: With the access panel off, start the dishwasher and  
allow it to complete the shortest wash cycle. After the first  
2 minutes, unlatch door, wait 5 seconds, and then open door.  
Check that there is water in the bottom of the dishwasher tub.  
Check that dishwasher is working properly.  
Metal Panel:  
64. Reinstall access panels  
Install Access Panel  
– For Plastic, begin with step 61.  
– For Metal, begin with step 64.  
Plastic Panel:  
61. Reinstall access panel and fasteners  
A
Place the panel against dishwasher legs. Using a Phillips  
screwdriver or 1/4" nut driver, reinstall the screws through the  
holes in the access panel.  
65. Check lower panel edge  
A. Insulation (on some models)  
Place the plastic access panel against the dishwasher leg.  
Make sure insulation does not interfere with the float  
assembly.  
62. Check access panel edge  
Check that the lower edge of the access panel touches the  
floor. Adjust if necessary.  
66. Tighten screws  
Check that the lower edge of the access panel touches the  
floor. Adjust if necessary.  
Tighten access panel screws.  
23  
 
GeneralDetails
NameTown Appliance W11711835A Dishwasher
MakeTown Appliance
LanguageEnglish
FiletypePDF (Download)
File size14.45 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Town Appliance W11711835A Dishwasher