Home > Town Appliance > Town Appliance W11711835A Dishwasher

Town Appliance W11711835A Dishwasher

23. Install strain relief  
25. Power cord – connect ground wire  
A
Install the metallic strain relief provided in this kit (Straight:  
Whirlpool Part Number 4317824, 90°: Whirlpool Part Number  
W10278923RP). Make sure screw heads are facing to the  
left when tightening conduit nut. Strain relief is provided with  
the power cord kit.  
A. Ground wire  
Remove the ground connector screw and place it through the  
ring terminal of the green ground wire of power cord.  
Reattach and tighten the ground connector screw.  
26. Power cord – connect remaining wires  
24. Power cord – route cord into terminal box  
Select twist-on wire connectors of the proper size provided in  
this kit (Straight: Whirlpool Part Number 4317824, 90°:  
Whirlpool Part Number W10278923RP) . Connect wires,  
black to black and white to white, using the twist-on wire  
connectors.  
NOTE: Do not pre-twist stranded wire. Twist on wire  
connector. Gently tug on wires to be sure both are secured.  
Route cord so that it does not touch dishwasher motor or  
lower part of dishwasher tub. Pull cord through strain relief in  
terminal box.  
NOTE: A maximum of 2 power cord supply conductors (12  
AWG largest size) plus 1 grounding conductor are permitted  
in the terminal box.  
Wiring configuration  
WARNING  
Power supply  
wire:  
Terminal box  
wire:  
white  
white  
black  
black  
Electrical Shock Hazard  
ground wire  
ground connector  
Electrically ground appliance.  
Connect ground wire to green ground connector in  
terminal box.  
Do not use an extension cord.  
Failure to follow these instructions can result in death,  
fire, or electrical shock.  
14  
GeneralDetails
NameTown Appliance W11711835A Dishwasher
MakeTown Appliance
LanguageEnglish
FiletypePDF (Download)
File size14.45 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Town Appliance W11711835A Dishwasher