Whirlpool WDFS3R4NWESG Sense Dishwasher

1

2

3

4

5

6

7

8

9

10

11

12

WDFS3R4NWESG  

INSTALLATION GUIDE, SAFETY INSTRUCTIONS  

AND DAILY REFERENCE GUIDE  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Whirlpool WDFS3R4NWESG Sense Dishwasher
Make	Whirlpool
Language	English
Filetype	PDF (Download)
File size	6.06 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Whirlpool

Whirlpool WDFS3R4NWESG Sense Dishwasher Overview

Summary of Contents

• Page 1: Installation guide, safety instructions, and daily reference guide.
• Page 2: Installation guide Safety instructions Daily reference guide Control panel First time use Daily use Advice and tips Programs table Options and functions Care and maintenance
• Page 3: Installation guide Minimum pressure: 0.05 MPa/0.5 Bar Maximum pressure: 1 MPa/10 Bar Minimum distance: 10 mm Minimum height: 25 mm Approximate height: 1300 mm Approximate height: 1500 mm
• Page 4: Page 4
• Page 5: Safety instructions must be read and observed. Use only detergent and rinse additives designed for an automatic dishwasher. Store detergent, rinse aid, and salt out of reach of children. Disconnect the appliance in the event of any malfunction. Very young children should be kept away from the appliance. Installation must be carried out by a qualified technician. The appliance must be connected to the water mains using only new hose sets. The appliance must be placed against the wall or built into furniture to limit access to its rearside. The appliance is not intended to be operated by an external switching device. The maximum number of place settings is shown in the product sheet. The appliance must be used only to wash domestic dishes in accordance with the instructions in this manual.
• Page 6: the appliance for the first time, check the water inlet and drain hose for leaks. this appliance is manufactured with recyclable or reusable materials. dispose of it in accordance with local waste disposal regulations. this appliance is marked in compliance with European Directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE). the rating plate is on the edge of the dishwasher door (visible when the door is open). the electrical components must not be accessible to the user after installation. do not use the appliance when you are wet or barefoot. the ECO program is suitable to clean normally soiled tableware. ensure that the appliance is switched off and disconnected from the power supply before performing any maintenance operation. the packaging material is 100% recyclable and is marked with the recycle symbol.
• Page 7: Daily Reference Guide Thank you for buying a Whirlpool product. Before using the appliance, carefully read Safety and Installation Instructions. After installation, please remember to remove all transport protection parts from the dishwasher. Control panel includes various buttons such as ON-OFF/Reset, Previous program, Next program, and more. Only use salt that has been specifically designed for dishwashers. Water softener automatically reduces water hardness, preventing scale buildup and contributing to better cleaning efficiency. Rinse aid makes dish drying easier and should be filled when the Rinse Aid Refill indicator light is lit. It is mandatory that the salt reservoir never be empty. To allow the water softener to work effectively, the water hardness setting must be based on the actual water hardness in your house. Usage of detergent not designed for dishwashers may cause malfunction or damage to the appliance.
• Page 8: Check that the dishwasher is connected to the water supply and that the tap is open. If a wrong program was selected, it is possible to change it, provided that it has only just begun. Press and hold the ON/OFF button for more than 3 seconds to reset the machine. Select the most appropriate program in accordance with the type of crockery and its soiling level. Without switching off the machine, open the door slightly to avoid water splashing out and place the crockery inside. Start the wash cycle by closing the door and pressing the START/Pause button. The end of the wash cycle is indicated by sound and the display shows END. Before loading the baskets, remove all food residues from the crockery and empty the glasses. When the household dishwasher is used according to the manufacturer’s instructions, washing tableware in a dishwasher usually consumes less energy and water than hand dishwashing. To avoid odour and sediment, please run a high-temperature program at least once a month.
• Page 9: Daily Reference Guide Programs table Eco 50° - Environmentally-friendly wash cycle with low energy consumption level. Standard cycle suitable to wash normally soiled load. Auto Intensive 65° - Automatic program for heavily soiled crockery, especially for pots and saucepans. Senses the level of soiling on the dishes and adjusts the program accordingly. Auto Mixed 55° - Automatic program for mixed soiled dishes with dried food residues. Silent 50° - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission. Sanitizing 65° - Mixed or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the dishwasher. Prewash - Used to refresh crockery planned to be washed later. No detergent is to be used with this program. Self-Clean 65° - Program to be used to perform maintenance of the dishwasher, to be carried out only when the dishwasher is empty using specific detergents designed for dishwasher maintenance. Options and functions Turbo - Thanks to the Turbo option you can reduce time up to 40%. NaturalDry - A convection drying system which automatically opens the door during/after the drying phase to ensure exceptional drying performance every day.
• Page 10: Capacity: 14 standard place-settings The third rack was designed to house the cutlery. A separate arrangement of the cutlery makes collection easier after washing and improves washing and drying performance. The side foldable flaps can be folded or unfolded to optimize the arrangement of crockery inside the rack. Load delicate and light dishes: glasses, cups, saucers, low salad bowls. For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should ideally be placed at the sides to avoid interferences with the spray arm. The height of the upper rack can be adjusted to create more space upwards and avoid collision with items loaded into the lower rack. Regularly clean the filter assembly so that the filters do not clog and that the waste water flows away correctly. The dishwasher must not be used without filters or if the filter is loose. After cleaning the filters, replace the filter assembly and fix it in position correctly; this is essential for maintaining the efficient operation of the dishwasher.
• Page 11: Daily reference guide Cleaning the spray arms The lower spray arm may be removed by pulling it upwards and rotating it anti-clockwise. Food residue may become encrusted onto the spray arms and block the holes used to spray the water. It is recommended to check the arms from time to time and clean them with a small non-metallic brush. Troubleshooting In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. Refill the reservoir with salt if the salt indicator is lit or blinking. Descale the appliance immediately using the Self-Clean program and a commercially available descaling product. The dishwasher won’t start or does not respond to commands if it has not been plugged in properly. Clean the filter and descale the appliance if the dishwasher won’t drain. The dishes are not clean if the spray arms cannot rotate freely, being hindered by the dishes.
• Page 12: Problems possible causes and solutions for the dishwasher include: No water in the water supply or the tap is closed. Ensure there is water in the supply and the tap is open. The water inlet hose is kinked. Check the inlet hose and press the START/Pause button. The screen in the water inlet hose is clogged. Clean the screen in the hose. The dishwasher finishes the cycle prematurely. Clean the filter and descale the appliance. The drain hose is positioned too low or siphoning into the home sewage system. Check the drain hose height. The detergent has not been measured out correctly or is unsuitable for dishwashers. Ensure proper detergent use. An excessive amount of foam is present. Check for air in the water supply. The rinse aid dispenser is empty or dosage is too low. Refill the rinse aid dispenser. The selected cycle does not have a drying phase. Change to a cycle that includes drying. Dishes and glasses are covered with limescale or a whitish film. Adjust the water hardness setting.