Bauknecht B7I HF60 Dishwasher
EN
CARE AND MAINTENANCE
CLEANING THE FILTER ASSEMBLY
CLEANING THE SPRAY ARMS
Regularly clean the filter assembly so that the filters do not clog and On occasions, food residue may become encrusted onto the spray arms
that the waste water flows away correctly.
and block the holes used to spray the water. It is therefore recommend-
Using dishwasher with clogged filters or foreign objects inside filtration ed that you check the arms from time to time and clean them with
system or sprayarms may cause unit malfunction resulting in lose of a small non-metallic brush.
performance, noisy work or higher resources usage.
The filter assembly consists of three filters which remove food residues
from the washing water and then recirculate the water.
The dishwasher must not be used without filters or if the filter is
loose.
At least once per month or after each 30 cycles, check the filter assem-
bly and if necessary clean it thoroughly under running water, using
a non-metallic brush and following the instructions below:
1. Turn the cylindrical filter A in an anti-clockwise direction and pull it
out (Fig 1).
To remove the upper spray arm, turn the plastic locking ring in a clock-
wise direction. The upper spray arm should be replaced so that the side
with the greater number of holes is facing upwards.
2. Remove the cup filter B by exerting a slight pressure on the side
flaps (Fig 2).
3. Slide out the stainless-steel plate filter C (Fig 3).
4. In case you find foreign objects (such as broken glass, porcelain,
bones, fruit seeds etc.) please remove them carefully.
5. Inspect the trap and remove any food residues. NEVER REMOVE
the wash-cycle pump protection (black detail) (Fig 4).
1
2
The lower spray arm may be removed by pulling it upwards.
B
WATER SOFTENING SYSTEM
A
A
Water softener automatically reduces water hardness, consequently
preventing scale buildup on heater, contributing also to better cleaning
efficiency.
This system regenerates itself with salt, therefore it is required to
refill salt container when empty.
Frequency of regeneration depends on water hardness level setting
- regeneration takes place once per 6 Eco cycles with water hardness
level set to 3.
Regeneration process starts in final rinse and finishes in drying phase,
before cycle ends.
•
•
•
Single regeneration consumes: ~3.5 L of water;
Takes up to 5 additional minutes for the cycle;
Consumes below 0.005 kWh of energy.
C
3
4
After cleaning the filters, replace the filter assembly and fix it in position
correctly; this is essential for maintaining the efficient operation of the
dishwasher.
CLEANING THE WATER INLET HOSE
If the water hoses are new or have not been used for an extended peri-
od of time, let the water run to make sure it is clear and free of impuri-
ties before performing the necessary connections. If this precaution is
not taken, the water inlet could become blocked and damage the dish-
washer.
7
| General | Details |
|---|---|
| Name | Bauknecht B7I HF60 Dishwasher |
| Make | Bauknecht |
| Language | English |
| Filetype | PDF (Download) |
| File size | 9.34 MB |
(1 votes, average: 5.00 out of 5)
Loading...
BAUKNECHT 295f471f27d55b Dishwasher
Bauknecht BK6UC11BS7A0X Dishwasher
Bauknecht Dishwasher
Bauknecht 3O35 PF Dishwasher
Bauknecht AUTBFC3C26 Dishwasher
BAUKNECHT B2I HD526 A Dishwasher
Bauknecht BFP 5O41 PLT X Dishwasher
InDesiT D2I HL326 UK Dishwasher
COMFEE FD1435E-W Slimline Dishwasher
BOSCH SHX4AEF5N Dishwasher
INVENTUM VVW6046AW Dishwasher
Thermador DWHD640EFM Dishwasher
Westinghouse WDU903SA Household Dishwasher
BOSCH SHP78CM6N Dishwasher
FISHER AND PAYKEL DD24SCTW9 DishDrawer Dishwasher
FISHER and PAYKEL DW24UNT4X2 Dishwasher
IKEA FINPUTSAD Integrated Dishwasher