beko BDIS15063 Dishwasher
Preparation
When you switch to powder
detergent from tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Fill the reservoir until “MAX” level.
2. Set the water hardness to the highest
level and perform an empty run.
3. After the empty washing cycle, review
the user manual and readjust the water
hardness level so as to suit the water
supply.
3. Slightly press the point (B) of the
reservoir lid to close it.
4. Make the appropriate rinse aid settings.
Rinse aid
The rinse aid used in
dishwashers is a special
C combination that aims to
increase drying efficiency and
prevent water or lime stains
on the washed items. For this
reason, care must be paid
to have rinse aid in the rinse
aid reservoir and to use rinse
aids produced specially for
dishwashers only.
4. If there are stains on tableware items
after washing, level must be increased
and if there is a blue trace after wiping
them by hand, it must be decreased.
This is set to position 3 as factory
default.
1. Open the lid of the rinse aid reservoir
with the help of the latch.
The rinse aid adjustment is
described under "Adjusting
C the amount of rinse aid" in
the section for operating the
machine.
Wipe clean any spilled rinse
aid outside the reservoir. Rinse
C aid that spilled accidentally
will cause foaming and it will
eventually decrease washing
performance.
18 /38 EN
/
| General | Details |
|---|---|
| Name | beko BDIS15063 Dishwasher |
| Make | Beko |
| Language | English |
| Filetype | PDF (Download) |
| File size | 7.02 MB |

beko DUT25401WHW Front Pocket Handle Dishwasher

beko BDIN38522Q Dishwasher

beko BDFN26450A Dishwasher

beko BDFS26046XQ Dishwasher

beko BDFN26521XQ Dishwasher

NMG0724BEKODI Dishwasher

beko 943711 Dishwasher

beko DIN15210 Full-Size Dishwasher

beko 57 6190 0000 Tall Tub Dishwasher

beko BDIN38650C Dishwasher



















































