caple DI631 Dishwasher
CARING FOR THE DISHWASHER
The control panel can be cleaned by using a lightly dampened cloth. After cleaning, make sure to
dry it thoroughly.
NOTE:
If your dishwasher cannot work because of the ice build up, please contact a qualified plumber
or serviceman.
For the exterior, use a good appliance polish wax. Never use sharp objects, scouring pads or harsh
cleaners on any part of the dishwasher.
CLEANING THE SPRAY ARMS
It is necessary to clean the spray arms regularly as hard water chemicals
will clog the spray arm jets and bearings.
CLEANING THE DOOR.
To remove the upper spray arm, hold the nut, rotate the arm clockwise to
remove it.
To clean the edge around the door, you should
use only a soft warm, damp cloth. To avoid
penetration of water into the door lock and
electrical components, do not use a spray
cleaner of any kind.
To remove the lower spray arm, pull out the spray arm upward.
Wash the arms in warm soapy water and use a soft brush to clean the
jets. Replace them after rinsing them thoroughly.
WARNING:
HOW TO KEEP YOUR DISHWASHER IN SHAPE
»
Never use a spray cleaner to clean the door panel as it may damage the door lock and
electrical components.
AFTER EVERY WASH
After every wash, turn off the water supply to the appliance and leave the door slightly open so
that moisture and odours are not trapped inside.
»
Abrasive agents or some paper towels should not be used because of the risk of scratching or
leaving spots on the stainless steel surface.
REMOVE THE PLUG
Before cleaning or performing maintenance, always remove the plug from the socket.
PROTECT AGAINST FREEZING
NO SOLVENTS OR ABRASIVE CLEANING
Please take frost protection measures on the dishwasher in winter. Every time after washing cycles
please operate as follows:
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning
products. Only use a cloth with warm soapy water. To remove spots or stains from the surface of
the interior, use a cloth dampened with water and a little vinegar, or a cleaning product made
specifically for dishwashers.
1. Cut off the electrical power to the dishwasher.
2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
3. Drain the water from the inlet pipe and water valve. (Use a pan to gather the water).
4. Reconnect the water inlet pipe to the water valve.
WHEN NOT IN USE FOR A LONG TIME
It is recommend that you run a wash cycle with the dishwasher empty and then remove the plug
from the socket, turn off the water supply and leave the door of the appliance slightly open. This
will help the door seals to last longer and prevent odours from forming within the appliance.
MOVING THE APPLIANCE
If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can
be positioned on its back.
5. Remove the filter at the bottom of the dishwasher and use a sponge to soak up water in
the sump.
SEALS
One of the factors that causes odours to form in the dishwasher is food that remains trapped in
the seals. Periodic cleaning with a damp sponge will prevent this from occurring.
30 Instruction manual DI631 Please keep this instruction manual for future reference
Please keep this instruction manual for future reference Instruction manual DI631
31
| General | Details |
|---|---|
| Name | caple DI631 Dishwasher |
| Make | caple |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.41 MB |
(1 votes, average: 5.00 out of 5)
Loading...
caple DI654 Dishwasher
caple DI641 Dishwasher
TOSHIBA DW-15F5SS-AU Dishwasher
SIEMENS SN45ZS55CS Dishwasher
Electrolux ESF5206LOW UltimateCare 300 Dishwasher
BOSCH SBH4EVX08E65 Fully Dishwasher
FISHER PAYKEL DD60DAW9 Dishwasher
Fisher and Paykel DW60FC2X2 Dishwasher
FISHER PAYKEL DD24ST4NX9 Drawer TM Dishwasher
BOSCH SMT6EB801E Fully Integrated Dishwasher
BOSCH SMS4HMW26M Free-Standing Dishwasher
BOSCH SMS6ZCI01P Dishwasher