caple DI631 Dishwasher
The dishwasher must be level for proper dish rack operation and wash performance.
ELECTRICAL CONNECTION
WARNING:
For personal safety:
1. Place a spirit level on door and rack track inside the dishwasher as shown to check that the
dishwasher is level.
»
»
Do not use an extension cord or an adapter plug with this appliance.
2. Level the dishwasher by adjusting the three levelling legs individually.
Do not, under any circumstances, cut or remove the earthing connection from the power cord.
3. When levelling the dishwasher, please pay attention not to let the dishwashertip over.
ELECTRICAL REQUIREMENTS
Please look at the rating label to know the rating voltage and connect the dishwasher to the
appropriate power supply. Use the required 10 amp fuse, time delay fuse or circuit breaker
recommended and provide separate circuit serving only this appliance.
Figure 8
Illustration of
feet adjustment
ELECTRICAL CONNECTION
Ensure the voltage and frequency of the power corresponds to those on the rating label. Only
insert the plug into an electrical socket which is earthed properly. If the electrical socket to which
the appliance must be connected is not appropriate for the plug, replace the socket, rather than
using an adapter as they could cause overheating and burns.
Check level Front to Back
NOTE:
The maximum adjustment
height of the feet
Spirit level
GROUNDING INSTRUCTIONS
is 50 mm
This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce
the risk of electric shock by providing a path of least resistance for the electric current. This
appliance is equipped with a cord having an equipment-earthing conductor and an earthing plug.
The plug must be plugged into an appropriate outlet that is installed and earthed in accordance
with all local standards and requirements.
Check level side to side
WARNING:
Improper connection of the equipment grounding conductor can result in the risk of an electric
shock. Check with a qualified electrician or service representative if you are in doubt whether the
appliance is properly grounded. Do not modify the plug provided with the appliance, if it is not fit
for the outlet. Have a proper outlet installed by a qualified electrician.
C
O
L
D
W
A
T
E
R
C
O
N
N
E
C
T
I
O
N
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it
is fastened tightly in place. If the water pipes are new or have not been used for an extended
period of time, let the water run to make sure that the water is clear and free of impurities. If this
precaution is not taken, there is a risk that the water inlet can get blocked and damage
the appliance.
WARNING:
Please close the hydrant after using.
ATTENTION:
After installation, please make sure to keep this manual. The content of this manual is very helpful
to the users.
38 Instruction manual DI631 Please keep this instruction manual for future reference
Please keep this instruction manual for future reference Instruction manual DI631
39
| General | Details |
|---|---|
| Name | caple DI631 Dishwasher |
| Make | caple |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.41 MB |
(1 votes, average: 5.00 out of 5)
Loading...
caple DI654 Dishwasher
caple DI641 Dishwasher
SIEMENS SN63HX42VE Dishwasher
FRIGIDAIRE FFBD1821MS Dishwasher
FISHER and PAYKEL DD60ST4ZB9 Dishwasher
ARDESTO DWMF-V608SMHW3 Dishwasher
ASKO DSD746U Dishwasher
Indesit D2F HD624 AS Dishwasher
BOSCH SMS2ITI12E Dishwasher
smeg STL323DALH Universale Totally Dishwasher
Whirlpool W11049299A Dishwasher
beko Din59530ad Epto Dishwasher