caple DI641 Dishwasher
SPRAY ARMS
It is necessary to clean the spray arms regularly as hard water chemicals will clog the spray arm
jets and bearings. To clean the spray arms, follow the instructions below:
Coarse filter
Main filter
Fine filter
Open
1. Hold the coarse filter and rotate
it anticlockwise to unlock the
filter. Lift the filter upwards and
out of the dishwasher.
2. The fine filter can be pulled off the bottom
of the filter assembly. The coarse filter can
be detached from the main filter by gently
squeezing the tabs at the top and pulling
it away.
1. To remove the upper spray
arm, hold the nut in the
centre still and rotate the
spray arm counter-clockwise
to remove it.
2. To remove the lower spray
arm, pull out the spray arm.
3. Larger food remnants can be
cleaned by rinsing the filter
under running water. For a
more thorough clean, use a soft
cleaning brush.
4. Reassemble the filters in the reverse order
of the disassembly, replace the filter insert,
and rotate clockwise to the close arrow.
WARNING
3. Wash the arms in soapy warm
water and use a soft brush to
clean the jets. Replace them after
rinsing them thoroughly.
Do not over tighten the filters. Put the filters back in sequence securely, otherwise coarse debris
could get into the system and cause a blockage.
NEVER use the dishwasher without filters in place. Improper replacement of
the filter may reduce the performance level of the appliance and damage dishes and utensils.
28 Instruction manual DI641 Please keep this instruction manual for future reference
Please keep this instruction manual for future reference Instruction manual DI641
29
| General | Details |
|---|---|
| Name | caple DI641 Dishwasher |
| Make | caple |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.62 MB |

caple DI654 Dishwasher

caple DI631 Dishwasher






































