caple DI641 Dishwasher
LOADING THE SALT INTO THE SOFTENER
WAT E R S O F T E N E R
NOTE:
The salt container is located beneath the lower basket and should be filled as explained in
the following:
The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water, which would have a
detrimental or adverse effect on the operation of the appliance.
The more minerals there are, the harder your water is. The softener should be adjusted according
to the hardness of the water in your area. Your local Water Authority can advise you on the
hardness of the water in your area.
WARNING
ONLY USE SALT SPECIFICALLY DESIGNED FOR DISHWASHERS USE:
Every other type of salt not specifically designed for dishwasher use, especially table salt,
will damage the water softener. In case of damages caused by the use of unsuitable salt the
manufacturer does not give any warranty nor is liable for any damages caused.
ADJUSTING SALT CONSUMPTION
The dishwasher is designed to allow for adjustment in the amount of salt consumed based on
the hardness of the water used. This is intended to optimise and customise the level of salt
consumption.
ONLY FILL WITH SALT BEFORE RUNNING A CYCLE.
This will prevent any grains of salt or salty water, which may have been spilled, remaining on the
bottom of the machine for any period of time, which may cause corrosion.
Please follow the steps below for adjustment in salt consumption.
1. Switch on the appliance;
2. Press the Program button for more than 5 seconds to start the water softener set model within
60seconds after the appliance was switched on;
3. Press the Program button to select the proper set according to your local environment, the sets
will change in the following sequence:
H1->H2->H3->H4->H5->H6;
4. Press the Power button to end the set up model.
WATER HARDNESS
Salt consumption
Water
GERMAN
°DH
FRENCH
BRITISH
softener level
(gram/cycle)
°FH
°CLARKE
MMOL/L
0~0.94
0~5
0~9
0~6
H1
H2
H3
H4
H5
H6
0
6-11
10-20
21-30
31-40
41-60
61-98
7-14
1.0-2.0
2.1-3.0
3.1-4.0
4.1-6.0
6.1-9.8
9
12-17
18-22
23-34
35-55
15-21
22-28
29-42
43-69
12
20
30
60
1°dH=1.25°Clarke=1.78 °fH=0.178mmol/l
The manufactory setting: H3
Contact your local water board for information on the hardness of your water supply.
12 Instruction manual DI641 Please keep this instruction manual for future reference
Please keep this instruction manual for future reference Instruction manual DI641
13
| General | Details |
|---|---|
| Name | caple DI641 Dishwasher |
| Make | caple |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.62 MB |
(1 votes, average: 5.00 out of 5)
Loading...
caple DI654 Dishwasher
caple DI631 Dishwasher
TESLA WD690MW Dishwasher
SIEMENS SN87YX01CE Dishwasher
FISHER PAYKEL DD60DTX6I1 Integrated Dishwasher
seasons 224FPC2MAWB Dishwasher
Haier HDW15V2 Dishwasher
Hotpoint H2I HD526 UK Dishwasher
BOSCH SMS2HTI79E Dishwasher
FISHER and PAYKEL DD60SCTW9 Contemporary Tall Dishwasher
caple DI654 Dishwasher
FISHER and PAYKEL DD60D4HNX9 Contemporary Dishwasher