caple DI641 Dishwasher
C A R I N G F O R T H E D I S H WA S H E R
I N S TA L L AT I O N I N S T RU C T I O N
FROST PRECAUTION
WARNING
Please take frost protection measures on the dishwasher in the winter. We recommend after every
wash cycle, please operate as follows:
ELECTRICAL SHOCK HAZARD
Disconnect electrical power before installing dishwasher.
Failure to do so could result in death or electrical shock.
1. Cut off the electrical power to the dishwasher at the supply source.
ATTENTION:
2. Turn off the water supply and disconnect the water inlet pipe from the
water valve.
The installation of the pipes and electrical equipments should be done by professionals.
3. Drain the water from the inlet pipe and water valve. (Use a pan to gather
the water)
ABOUT POWER CONNECTION
WARNING:
4. Reconnect the water inlet pipe to the water valve.
For personal safety:
»
»
Do not use an extension cord or an adapter plug with this appliance.
5. Remove the filter at the bottom of the dishwasher and use a sponge to soak up water in
the sump.
Do not, under any circumstances, cut or remove the earthing connection from the power cord.
AFTER EVERY WASH
After every wash, we recommend that you turn off the water supply to the appliance and leave the
door slightly open so that moisture and odours are not trapped inside.
ELECTRICAL REQUIREMENTS
Please look at the rating label to know the rating voltage and connect the dishwasher to the
appropriate power supply. Use the required fuse 10A or 13A, time delay fuse or circuit breaker
recommended and provide a separate circuit serving only this appliance.
REMOVE THE PLUG
Before cleaning or performing maintenance, always remove the plug from
the socket.
ELECTRICAL CONNECTION
Ensure the voltage and frequency of the power being corresponds to those on the rating plate.
Only insert the plug into an electrical socket which is earthed properly. If the electrical socket to
which the appliance must be connected is not appropriate for the plug, replace the socket, rather
than using a adaptors or the like as they could cause overheating and burns.
NO SOLVENTS OR ABRASIVE CLEANING
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning
products. Only use a cloth with warm soapy water. To remove spots or stains from the surface of
the interior, use a cloth dampened with water and a little vinegar, or a cleaning product made
specifically for dishwashers.
ENSURE THAT PROPER EARTHING EXISTS BEFORE USE
WHEN NOT IN USE FOR A LONGTIME
It is recommend that you run a wash cycle with the dishwasher empty and then remove the plug
from the socket, turn off the water supply and leave the door of the appliance slightly open. This
will help the door seals to last longer and prevent odours from forming within the appliance.
MOVING THE APPLIANCE
If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can
be positioned on its back.
30 Instruction manual DI641 Please keep this instruction manual for future reference
Please keep this instruction manual for future reference Instruction manual DI641
31
| General | Details |
|---|---|
| Name | caple DI641 Dishwasher |
| Make | caple |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.62 MB |
(1 votes, average: 5.00 out of 5)
Loading...
caple DI654 Dishwasher
caple DI631 Dishwasher
GRUNDIG GNFP3440X Dishwasher
FISHER PAYKEL DW60U6I1 Dishwasher
Omega ODWIF6015 Integrated Dishwasher
SIEMENS SE23HW64CG Full Size 14 Place Settings Dishwasher
FISHER AND PAYKEL DD24DCTB9_N Contemporary Tall Dishwasher
Whirlpool DU1014XTXQ Dishwasher
BOSCH SMH4EVX00E Dishwasher
FISHER PAYKEL DD24SCTX9N Dishwasher
FISHER AND PAYKEL DD24STI9 N Tall Dishwasher
BOSCH SN55HS00VI Dishwasher