caple DI641 Dishwasher
STEP 2:
STEP 4:
Furniture door panel’s dimensions and installation
Dishwasher installation steps
NOTE:
NOTE:
Please refer to the specified installation steps in the installation drawings.
The furniture door weight should be 5-7KG.
1. Affix the condensation strip under the work surface of cabinet. Please ensure the condensation
strip is flush with edge of work surface. (Step 1)
FULL-INTEGRATED MODEL
Install the hook on the furniture door panel and put the hook into the slot of the outer door of
dishwasher (see figure A). After positioning of the panel, fix the panel onto the outer door by
screws and bolts (See figure B).
2. Connect the inlet hose to the cold water supply.
3. Connect the drain hose.
4. Connect the power cord.
Fig.A
1. Take away the four short screws
Fig.B
5. Place the dishwasher into position.
6. Level the dishwasher. The rear foot can be adjusted from the front of the dishwasher by turning
the Philips screw in the middle of the base of dishwasher. To adjust the front feet, use a flat
screw driver and turn the front feet until the dishwasher is level. (Step 5 to Step 6)
7. Install the furniture door to the outer door of the dishwasher. (Step 2)
8. Adjust the tension of the door springs by using an screwdriver and turning in a clockwise
motion to tighten the left and right door springs. Failure to do this could cause damage to your
dishwasher. (Step 3)
2. Insert the four long screws
9. The dishwasher must be secured in place. There are two ways to do this:
»
Normal work surface: Put the installation hook into the slot of the side plane and secure
it to the work surface with the wood screws.
STEP 3:
Tension adjustment of the door spring:
»
Marble or granite work top: fix to the side panel with the screws provided.
»
The door springs are set at the factory to the
tension of the outer door. Once the furniture door
panel is installed, you will have to adjust the door
spring tension. Rotate the adjusting screw to drive
the adjustor to strain or relax the steel cable.
A
»
The door spring tension is correct when the door
remains horizontal in the fully opened position, yet
rises to a close with the slight lift of a finger.
B
36 Instruction manual DI641 Please keep this instruction manual for future reference
Please keep this instruction manual for future reference Instruction manual DI641
37
| General | Details |
|---|---|
| Name | caple DI641 Dishwasher |
| Make | caple |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.62 MB |
(1 votes, average: 5.00 out of 5)
Loading...
caple DI654 Dishwasher
caple DI631 Dishwasher
BOSCH SHV78B73 800 Series 24 InchCustom Panel Dishwasher
ISTA iQ300 Dishwasher
BOSCH SMS4HMI00G Free-Standing Dishwasher
BOSCH SMS6EMI65M Free Standing Dishwasher
comfee CDC22P1AWW Compact Dishwasher
FAGOR 3LVF-421.1, 3LVF-421.1X Dishwasher
BOSCH SMV25BX04R Dishwasher
FISHER PAYKEL DW60FC1X1 Dishwasher
BOSCH SMI6HAS00X-13 Dishwasher
BOSCH SMV6ZCX10E Dishwasher