Home > CMA > CMA-66 EST-66 Conveyor Dishwasher

CMA-66 EST-66 Conveyor Dishwasher

Operation  
3.4. Quick service guide  
MODELS: CMA 44/66 CONVEYOR (S)  
TECHNICAL ISSUE  
Continuously cycles  
CAUSE  
SOLUTION  
Manual/auto switch in MANUAL mode or faulty Turn switch to AUTO position or replace  
Conveyer timer faulty  
Replace timer, P/N 13418.85  
Replace micro switch, P/N 00411.00  
Adjust cam  
Faulty tilt micro switch  
Micro switch cam out of adjustment  
Faulty rinse solenoid valve  
Power disrupted  
Final rinse does not come on  
Replace diaphragm or coil, P/N 00738.15  
Check wall breaker switch  
Faulty table limit switch  
Faulty door reed switch  
Burnt internal glass fuse  
Faulty power shut off switch  
Faulty main contactor  
Check and replace, P/N 13827.10  
Check and replace, P/N 00557.30  
Check and replace, P/N 13403.26  
Check and replace, P/N 00421.83  
Check and replace, P/N 13003.50  
Does not run  
Machine is not level  
Dishtable slants away from dishmachine,  
loosing water down quick- drain on table  
Level machine using leg adjustments  
Slant table to carry excess water towards  
machine tank/plumb quick-drain back to machine  
above water line  
Losing water  
Oil coming out of conveyor motor  
Broken shaft seal in gear box  
Wrong conveyor motor rotation  
Replace gear box, P/N 13504.00 OR .12  
Replace bearing, check and correct conveyor  
motor rotation, P/N 13507.50  
Conveyor cam bearing destroyed  
Faulty reed switch at the dishmacine entrance Check and replace, P/N 00557.56  
Machine only runs in manual mode  
Check and replace, P/N 13418.85  
Faulty conveyor timer  
Check and replace, P/N 13003.70  
Faulty manual/auto toggle switch  
Check and replace, P/N 00421.87  
Faulty heater switch  
Check and replace, P/N 13417.85  
Faulty heater thermostat  
Check and replace, P/N 13463.10  
Faulty heater float switch  
Heater does not work  
Check and replace, P/N 13003.50  
Faulty heater contactor  
Check and replace, P/N 13417.77  
Faulty heater  
Not adjusted or faulty pressure regulator  
Adjust (20psi) or replace regulator, P/N 13602.45  
Low or no pressure at final rinse arm  
Clogged rinse arm jets  
Faulty water solenoid  
Clean rinse arm jets  
Check and replace solenoid, P/N 00738.15  
Clogged manifold system  
Clogged spray jets  
Check and clean  
No pressure at wash arms  
Check and clean  
Motor rotation, wrong direction  
See wiring instruction on motor for proper rotation  
Debris stuck in pump cover/damaged impeller Check and clean/replace impeller, P/N 03222.85  
MODEL CMA-66 Installation & Operation Manual Rev. 1.09 B  
Page  
20  
GeneralDetails
NameCMA-66 EST-66 Conveyor Dishwasher
MakeCMA
LanguageEnglish
FiletypePDF (Download)
File size0.59 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
CMA UC65e M3 Undercounter Dishwasher
CMA UC65e M3 Undercounter Dishwasher
CMA H-1X Undercounter Dishwasher
CMA H-1X Undercounter Dishwasher
CMA EST-FL1 EST Front Loader Water Dishwasher
CMA EST-FL1 EST Front Loader Water Dishwasher

CMA-66 EST-66 Conveyor Dishwasher