Home > CMA Dishmachines > CMA DISHMACHINES CMA-180UC Under Counter Dishwasher
CMA DISHMACHINES CMA-180UC Under Counter Dishwasher
Operation
3. Operation
3.1.
Initial Setup
3.1.1. Rinse Pressure Regulator (Models manufactured prior to January
2008 and starting April 2018 to current).
The CMA-180UC requires a supply water input pressure of 24 PSI minimum. This
pressure is then reduced by the supply water regulator. Use the following procedure
to adjust the rinse pressure to 20 PSI:
1. Close the door on the machine. Turn the Power switch to the "ON" position.
2. Machines built prior to January 2020 will be automatically filled to the correct
level.
3. Machines built after January 2020 press and hold the "FILL" button for 25
seconds.
4. Adjust the pressure regulator until the gauge the gauge reads 20 PSI.
Regulator is located behind the front kick panel.
3.1.2. Flow Disc (Models manufactured between January 2008 and April
2018).
Flow Disc has been placed on the exit side of the water valve. The Flow Disc
reduces pressure to the standard recommended 20 PSI.
3.1.3. Rinse and Wash Temperatures3
1. Turn the Power switch to the "ON" position.
2. After the machine has warmed up for 10-15 minutes, note the wash
temperature. The wash temperature must be 155°F minimum. The rinse
temperature must be 180°F minimum. Rinse temperature will only display
during RINSE section of cycle. If necessary, adjust the temperatures by
removing the front kick panel and turning the thermostat adjustment
clockwise to increase, counterclockwise to decrease. This one adjustment
controls both temperatures.
3.1.4. Post Instructions
1. Install wall chart and instruct machine operator on proper cleaning and
operation of the CMA-180UC.
3.2.
Startup Procedures
1. Open the door of the machine and check that the scrap screen is in place, and that
the spray arms and end plugs are secure.
2. Close the door of the machine and turn the Power switch to the "ON" position. The
machine will be automatically filled to the correct level for machines built prior to Jan
2020. Press and hold the "FILL" button for 25 seconds for machines built after Jan
2020.
3. Press the rocker switch marked “START” – the machine will automatically begin its
cycle.
4. Check machine’s operating temperatures — Adjust if necessary. See section 3.1.3
Rinse and Wash Temperatures.
MODEL CMA-180UC INSTALLATION & OPERATION MANUAL Rev. 1.20
Page
13
| General | Details |
|---|---|
| Name | CMA DISHMACHINES CMA-180UC Under Counter Dishwasher |
| Make | CMA Dishmachines |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.46 MB |
(1 votes, average: 5.00 out of 5)
Loading...
CMA DISHMACHINES EST-44 Conveyor Dishwasher
CMA DISHMACHINES EST-AH Door Type Rack Low Dishwasher
CMA DISHMACHINES UC65e M3 Dishwasher
CMA DISHMACHINES CMA-180VL Dishwasher
CMA DISHMACHINES UC50e Dishwasher
CMA DISHMACHINES CMA-180 Dishwasher
CMA DISHMACHINES CMA-180UC Dishwasher
CMA DISHMACHINES H-1X Undercounter Dishwasher
CMA DISHMACHINES 180UC-3 Under Counter Dishwasher
CMA DISHMACHINES AH Straight Thru Design Dishwasher
Whirlpool WDF560SAF Undercounter Dishwasher
KKT KOLBE DW4505FS Dishwasher
FISHER PAYKEL DW24UT2I2 Tall Sanitize Integrated Dishwasher
BOSCH SMV4ECX21E-38 Dishwasher
UNIQUE APPLIANCES UGP-24CR DW W Dishwasher
FISHER PAYKEL DD60DI9 Integrated Double Dishwasher
GE CGP6030 30 Inch Gas Cooktop with Dishwasher
FISHER PAYKEL DD60ST4HNB9 Built Under Dishwasher
VALBERG FBI16S43A 16 Dishwasher
FISHER PAYKEL DD60DDFB9 Dishwasher