Home > CMA Dishmachines > CMA DISHMACHINES CMA-180UC Under Counter Dishwasher
CMA DISHMACHINES CMA-180UC Under Counter Dishwasher
Operation
4.3.
Drain Pump Removal Instructions
Drain Pump (P/N 15503.00) should only be used if a floor drain is not accessible to
the machine at installation.
When converting the UC-180 dishwasher to a gravity drain unit, remove the drain pump
assembly as shown in Figure 1. Re-route the 6Ft drain hose to the center port were the
drain pump was located, moving the displaced line to the open port of the valve. Insure
there is a 1” air gap between the discharge and floor drain as shown in Figure 2.
Remove this cover to
disconnect the wires
Disconnect
purple and white
wires
Remove this
hose clamp
over Drain
Valve.
Remove drain hose from
the drain gooseneck
Disconnect 3-
inch pump inlet
drain hose.
Figure 1
Figure
Figure 2
MODEL CMA-180UC INSTALLATION & OPERATION MANUAL Rev. 1.20
Page
24
| General | Details |
|---|---|
| Name | CMA DISHMACHINES CMA-180UC Under Counter Dishwasher |
| Make | CMA Dishmachines |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.46 MB |

CMA DISHMACHINES EST-44 Conveyor Dishwasher

CMA DISHMACHINES EST-AH Door Type Rack Low Dishwasher

CMA DISHMACHINES UC65e M3 Dishwasher

CMA DISHMACHINES CMA-180VL Dishwasher

CMA DISHMACHINES UC50e Dishwasher

CMA DISHMACHINES CMA-180 Dishwasher

CMA DISHMACHINES CMA-180UC Dishwasher

CMA DISHMACHINES H-1X Undercounter Dishwasher

CMA DISHMACHINES 180UC-3 Under Counter Dishwasher

CMA DISHMACHINES AH Straight Thru Design Dishwasher













































