Home > GE Appliances > GE APPLIANCES DT605PSMSS with Plastic Interior Dishwasher

GE APPLIANCES DT605PSMSS with Plastic Interior Dishwasher

Dishwasher Installation  
STEP 1  
INSTALL HANDLE  
(on some models)  
CHECK DOOR BALANCE  
STEP 2  
CAUTION  
• Remove the packaged handle from the lower rack  
by pulling its shipping clips out and up.  
Opening the door will cause the dishwasher  
to tip forward when it is not fully installed.  
When opening the door prior to the  
dishwasher being fully installed, hold the top of the  
dishwasher securely with one hand and hold the  
door with the other hand. Gloves should be worn.  
PRECAUCIÓN  
Abrir la puerta hará que el lavavajillas  
se incline hacia adelante cuando no se  
encuentre completamente instalado. Al abrir  
la puerta antes de haber instalado completamente el  
lavavajillas, sostenga la parte superior del lavavajillas  
de forma segura con una mano y sostenga la puerta  
con la otra mano. Se deberán usar guantes.  
To check the door balance, hold the top of the  
dishwasher firmly.  
• Check the door balance by opening and closing the  
door.  
• Door is properly  
balanced if,  
Door  
• Using the provided 1/8” Allen wrench, loosen the set  
screws to remove the shipping clips and discard them.  
when opened, it  
self closes within  
20° from vertical,  
stays in position  
from 20° to 70°  
and falls fully  
closes  
within  
20°  
Door stays in  
position from  
20° to 70°  
open beyond 70°.  
Door falls fully  
open beyond 70°  
NOTE: Springs are  
not adjustable.  
Side View  
Remove and  
discard the  
shipping clips  
Tip: Make sure door opens and closes smoothly.  
Check door opening and closing. If door does not open  
easily or falls too quickly, check spring cable routing.  
The cable is held in place by “shoulders” on the pulley.  
Check to be sure cable has not slipped over the pulley  
shoulders and is routed as shown.  
• Place the handle on the dishwasher door mounting  
fasteners, with the set screws on the bottom side,  
then tighten the set screws with the Allen wrench.  
Make sure  
pulley cable  
is within  
pulley  
shoulders  
Fasten both sides  
using the 1/8”  
Allen wrench  
Front View  
6
GeneralDetails
NameGE APPLIANCES DT605PSMSS with Plastic Interior Dishwasher
MakeGE Appliances
LanguageEnglish
FiletypePDF (Download)
File size10.94 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
GE APPLIANCES GTW845 Dishwasher
GE APPLIANCES GTW845 Dishwasher
GE APPLIANCES GSD2100VBB Dishwasher
GE APPLIANCES GSD2100VBB Dishwasher
GE APPLIANCES GDF550PGR Plastic Interior Dishwasher with Front Controls
GE APPLIANCES GDF550PGR Plastic Interior Dishwasher with Front Controls
GE APPLIANCES PDT755SYV/BTV UltraFresh System Dishwasher with Interior
GE APPLIANCES PDT755SYV/BTV UltraFresh System Dishwasher with Interior
GE APPLIANCES GDT670SGV Interior Dishwasher with Hidden Controls
GE APPLIANCES GDT670SGV Interior Dishwasher with Hidden Controls
GE APPLIANCES GDT650SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES GDT650SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES PDP715SYVFS GE Profile Series Interior Dishwasher
GE APPLIANCES PDP715SYVFS GE Profile Series Interior Dishwasher
GE APPLIANCES PDT715SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES PDT715SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES PDT705SYWFS Dishwasher
GE APPLIANCES PDT705SYWFS Dishwasher
GE APPLIANCES GDT565HSYSS Energy Star Hybrid Tub Dishwasher
GE APPLIANCES GDT565HSYSS Energy Star Hybrid Tub Dishwasher

GE APPLIANCES DT605PSMSS with Plastic Interior Dishwasher