Home > GE Appliances > GE APPLIANCES DT605PSMSS with Plastic Interior Dishwasher

GE APPLIANCES DT605PSMSS with Plastic Interior Dishwasher

Dishwasher Installation  
CONNECT DRAIN LINE  
• The hose should have already been detached from the  
tub at locations indicated. NOTE: Do not remove high  
drain loop.  
CONNECT DRAIN LINE  
STEP 14  
STEP 14  
(CONT.)  
Do NOT  
remove  
hose from  
here (high  
drain loop  
Hose  
Clamp  
Remove  
hose,  
from  
• Connect drain line to air gap, waste tee or disposer  
using the previously determined method. Secure  
hose with a hose clamp.  
area).  
these  
areas  
only,  
as  
needed  
Method 1 – Air gap with waste tee or disposer  
72”  
max.  
72”  
max.  
Waste Tee Installation  
Disposer Installation  
Method 2 – “High drain loop” with waste tee or  
disposer  
The molded end of the drain hose will fit 5/8” through  
1” diameter inlet ports on the air gap, waste tee or  
disposer.  
With this method you will need the drain hose hanger  
set aside in Step 1.  
Fasten drain hose to underside of countertop with the  
provided hanger.  
Cutting Line  
• Determine size of inlet port.  
• Cut drain hose connector  
on the marked line, if  
Drain Hose Hanger  
Drain Hose Hanger  
required, to fit the inlet  
port.  
IMPORTANT: Do not cut  
corrugated portion of hose  
32” min. -  
• If a longer drain hose is required, you can purchase  
an extension drain hose - GE Appliances service  
part WD24X10062 (4’ length) or WD24X10065  
(12’ length) which can be connected directly to the  
drain hose already attached to the unit. To use the  
extension, you must cut the drain hose provided with  
the unit as shown. Use a hose cutter or razor blade  
knife to cut the drain hose.  
32” min. -  
72” max.  
18”  
min.  
72” max.  
18”  
min.  
Waste Tee Installation  
Disposer Installation  
IMPORTANT – When connecting drain line to  
disposer, check to be sure that drain plug has been  
removed. DISHWASHER WILL NOT DRAIN IF PLUG  
IS LEFT IN PLACE.  
Cut Line  
To use the 4’ drain  
hose extension:  
Only cut at this  
location  
Remove  
Drain  
Plug  
Drain Hose on  
Dishwasher  
Tip: Avoid unnecessary service call charges for a  
no drain complaint.  
House  
Dishwasher  
Connection  
To use the 12’ drain hose extension:  
Only cut ONE of these two locations  
Make sure excess drain hose has been pulled through  
the cabinet opening. This will prevent excess hose  
in the dishwasher cavity from becoming kinked or  
crushed by the dishwasher.  
ꢀ TOTAL DRAIN HOSE LENGTH MUST NOT EXCEED  
16’ FROM THE REAR OF THE DISHWASHER FOR  
PROPER DRAIN OPERATION.  
12  
GeneralDetails
NameGE APPLIANCES DT605PSMSS with Plastic Interior Dishwasher
MakeGE Appliances
LanguageEnglish
FiletypePDF (Download)
File size10.94 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
GE APPLIANCES GTW845 Dishwasher
GE APPLIANCES GTW845 Dishwasher
GE APPLIANCES GSD2100VBB Dishwasher
GE APPLIANCES GSD2100VBB Dishwasher
GE APPLIANCES GDF550PGR Plastic Interior Dishwasher with Front Controls
GE APPLIANCES GDF550PGR Plastic Interior Dishwasher with Front Controls
GE APPLIANCES PDT755SYV/BTV UltraFresh System Dishwasher with Interior
GE APPLIANCES PDT755SYV/BTV UltraFresh System Dishwasher with Interior
GE APPLIANCES GDT670SGV Interior Dishwasher with Hidden Controls
GE APPLIANCES GDT670SGV Interior Dishwasher with Hidden Controls
GE APPLIANCES GDT650SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES GDT650SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES PDP715SYVFS GE Profile Series Interior Dishwasher
GE APPLIANCES PDP715SYVFS GE Profile Series Interior Dishwasher
GE APPLIANCES PDT715SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES PDT715SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES PDT705SYWFS Dishwasher
GE APPLIANCES PDT705SYWFS Dishwasher
GE APPLIANCES GDT565HSYSS Energy Star Hybrid Tub Dishwasher
GE APPLIANCES GDT565HSYSS Energy Star Hybrid Tub Dishwasher

GE APPLIANCES DT605PSMSS with Plastic Interior Dishwasher