Home > GE Appliances > GE APPLIANCES DT605PSMSS with Plastic Interior Dishwasher
GE APPLIANCES DT605PSMSS with Plastic Interior Dishwasher
Dishwasher Installation
DISHWASHER WET TEST
STEP 17
STEP 18
POSITION SOUND
BARRIER AND INSULATION
(on some models)
Skip this step if the sound barrier is assembled
to the dishwasher.
• Turn on power supply or plug power cord into outlet,
if equipped.
• Select a cycle to run and push the Start/Reset pad.
• Ensure the door is latched. Dishwasher should start.
• Locate the sound insulation package inside the
dishwasher.
• Check to be sure that water enters the dishwasher.
If water does not enter the dishwasher, check to be
sure that water and power are turned on.
• Locate the control box.
• Check for leaks under the dishwasher. If a leak
is found, turn off power at the breaker, and then
tighten water connections. Restore power after leak
is corrected.
Control
Box
Junction Box
Cover
NOTE: A small amount of water may splash out of
the fill funnel, on the right side of the tub, during the
first use after installation. Splash-out is most likely to
occur if there is air in the water supply line from new
construction or if the valve has been closed for an
extended time.
• Apply the insulation to the underside of the control
box and flush with its front face as shown.
• Check for leaks around the door. A leak around
the door could be caused by door rubbing or
hitting against adjacent cabinets. Reposition the
dishwasher if necessary. See Step 12.
Junction Box
Cover
• Press and hold the Start/Reset pad for 3 seconds to
cancel the cycle. The unit will begin to drain. Check
drain lines. If leaks are found, turn off power at the
breaker and correct plumbing as necessary. Restore
power after corrections are made. See Steps 6, 7, 8,
9 and 16.
(on some models)
Insulation shown correctly placed along the bottom
edge of the control box, the dishwasher bottom and
flush with the front face.
• Open dishwasher door and make sure all of the
water has drained. If not, check that disposer plug
has been removed and/or air gap is not plugged.
Also check drain hose to be sure it is not kinked
underneath or behind dishwasher. See Step 16.
If the insulation has an extension piece (on
some models) follow these additional steps:
• Open door all the way, if the door doesn’t stay fully
open, adjust the insulation panel.
• Press Start/Reset pad once again and run
dishwasher through another cycle. Check for leaks and
correct if required.
• Align the screw holes with the screw holes on the
legs of the dishwasher.
• Repeat these steps as necessary.
• Ensure vent opening is not blocked by insulation.
Vent opening should be properly
aligned with cutout in the insulation
14
| General | Details |
|---|---|
| Name | GE APPLIANCES DT605PSMSS with Plastic Interior Dishwasher |
| Make | GE Appliances |
| Language | English |
| Filetype | PDF (Download) |
| File size | 10.94 MB |
(1 votes, average: 5.00 out of 5)
Loading...
GE APPLIANCES GTW845 Dishwasher
GE APPLIANCES GSD2100VBB Dishwasher
GE APPLIANCES GDF550PGR Plastic Interior Dishwasher with Front Controls
GE APPLIANCES PDT755SYV/BTV UltraFresh System Dishwasher with Interior
GE APPLIANCES GDT670SGV Interior Dishwasher with Hidden Controls
GE APPLIANCES GDT650SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES PDP715SYVFS GE Profile Series Interior Dishwasher
GE APPLIANCES PDT715SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES PDT705SYWFS Dishwasher
GE APPLIANCES GDT565HSYSS Energy Star Hybrid Tub Dishwasher
Monsher MD 4502 Dishwasher
FISHER AND PAYKEL DD24SDFTX9 N Dish Drawer Dishwasher
FISHER and PAYKEL DD24DCTX9 N Contemporary Tall Dishwasher
KitchenAid KDTE304RBS Third Level Jet Rack Dishwasher
Westinghouse WDU903SA Household Dishwasher
GAGGENAU DF264100 Dishwasher
BOSCH SPV2IKX2BR Dishwasher
JENNAIR JDAF5924RX Flush Mount Panel Ready Dishwasher
Electrolux EEC67310L Dishwasher
GAGGENAU DF261101 Dishwasher