Home > GE Appliances > GE APPLIANCES DT605PSMSS with Plastic Interior Dishwasher

GE APPLIANCES DT605PSMSS with Plastic Interior Dishwasher

Installation Preparation  
PREPARATION  
Locate the items in the installation package:  
PREPARE HOT WATER LINE  
NOTE: We recommend copper tubing for the water  
line, but if you choose to use flexible hose, use GE  
Appliances WX28X326, flexible braided hose.  
• Screws  
• Junction box cover  
• Drain hose and clamp  
• Mounting brackets  
The water supply line (3/8” copper tubing or flexible  
braided hose) may enter from either side, rear or  
floor within the shaded area shown in figure.  
• The water supply line may pass through the same  
hole as the electrical cable and drain hose. Or, cut  
an additional 1-1/2" diameter hole to accommodate  
the water line. If power cord with plug is used, water  
line must not pass through power cord hole.  
• Trim pieces (on some models)  
• Drain hose hanger  
• Insulation pieces (some models)  
• Toekick (pre-installed on some models)  
• Owner’s Manual  
• Product samples and/or coupons  
Turn page to begin dishwasher installation.  
1-1/2”  
Dia.  
Hole  
4"  
Shut-off  
Valve  
Hot  
6"  
2"  
From  
19" From Wall  
Cabinet  
2" From Floor  
Cabinet Face  
Water Line Connection  
• If using a flexible braided supply hose, label  
the hose with the installation date to use as  
reference. Flexible braided hoses, elbows and  
gaskets should be replaced in 5 years.  
• Turn off the water supply.  
• Install a hand shut-off valve in an accessible  
location, such as under the sink. (Optional, but  
strongly recommended and may be required by local  
codes.)  
• Water connection is on the left side of the  
dishwasher. Install the hot water inlet line, using no  
less than 3/8” copper tubing or a flexible braided  
hose. Route the line as shown in PREPARE HOT  
WATER LINE section and extend forward at least  
19” from rear wall.  
• Adjust water heater for 120°F to 140°F temperature.  
• Flush water line to clean out debris.  
• The hot water supply line pressure must be 20-120  
PSI.  
5
GeneralDetails
NameGE APPLIANCES DT605PSMSS with Plastic Interior Dishwasher
MakeGE Appliances
LanguageEnglish
FiletypePDF (Download)
File size10.94 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
GE APPLIANCES GTW845 Dishwasher
GE APPLIANCES GTW845 Dishwasher
GE APPLIANCES GSD2100VBB Dishwasher
GE APPLIANCES GSD2100VBB Dishwasher
GE APPLIANCES GDF550PGR Plastic Interior Dishwasher with Front Controls
GE APPLIANCES GDF550PGR Plastic Interior Dishwasher with Front Controls
GE APPLIANCES PDT755SYV/BTV UltraFresh System Dishwasher with Interior
GE APPLIANCES PDT755SYV/BTV UltraFresh System Dishwasher with Interior
GE APPLIANCES GDT670SGV Interior Dishwasher with Hidden Controls
GE APPLIANCES GDT670SGV Interior Dishwasher with Hidden Controls
GE APPLIANCES GDT650SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES GDT650SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES PDP715SYVFS GE Profile Series Interior Dishwasher
GE APPLIANCES PDP715SYVFS GE Profile Series Interior Dishwasher
GE APPLIANCES PDT715SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES PDT715SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES PDT705SYWFS Dishwasher
GE APPLIANCES PDT705SYWFS Dishwasher
GE APPLIANCES GDT565HSYSS Energy Star Hybrid Tub Dishwasher
GE APPLIANCES GDT565HSYSS Energy Star Hybrid Tub Dishwasher

GE APPLIANCES DT605PSMSS with Plastic Interior Dishwasher