Home > GE Appliances > GE APPLIANCES GSD2100VBB Dishwasher
GE APPLIANCES GSD2100VBB Dishwasher
Installation Preparation
PREPARE DISHWASHER ENCLOSURE
WARNING
To reduce the risk of electric shock, fire, or injury
to persons, the installer must ensure that the
dishwasher is completely enclosed at the time of
installation.
This wall area
MUST be
free of
pipes and wires
• The dishwasher must be installed so that drain hose is
no more than 12’ in length for proper drainage.
A = Height
Underside of
countertop to
floor
24”
6”
5”
5”
3”
• The dishwasher must be fully enclosed on the top, sides
and back, and must not support any part of the enclosure.
4”
Cabinets
square
and
CLEARANCES:
Countertop
• When installed into a corner,
Floor MUST be even
plumb
with room floor
allow 2” min. clearance
B = Width
between dishwasher and
Dishwasher
adjacent cabinet, wall or other
appliances. Allow 23-1/8” min.
clearance from the front of the
dishwasher for door opening.
Plumbing and electric service
MUST enter shaded area
23-1/8"
A
B
18” Models Only 32-1/2” min.-34-3/4” max. 18”
Clearance for Door
Opening 2” Minimum
24” Models Only 32-3/8” min.-34-3/4” max. 24”
DRAIN REQUIREMENTS
• Follow local codes and ordinances.
• Do not exceed 12’ distance to drain.
• Drain connection height is not to exceed 72” above
bottom of dishwasher.
Method 1 – Air Gap with Waste Tee or Disposer
An air gap must be used when required by local codes
and ordinances. The air gap must be installed according to
manufacturer’s instructions.
NOTE : Air gap must be used if waste tee or disposer
connection is less than 18” above floor to prevent
siphoning.
DETERMINE DRAIN METHOD
The type of drain installation depends on the following
questions.
• Do local codes or ordinances require an air gap?
• Is waste tee less than 18” above floor?
Method 2 – “High Drain Loop” with Waste Tee or Disposer
If the answer to either question is YES, Method 1
MUST be used.
Drain Hose Hanger
Drain Hose Hanger
• If the answers are NO, either method may be used.
CABINET PREPARATION
32"
Min.
32"
Min.
18"
• Drill a 1-1/2” diameter hole in the cabinet wall within
the shaded areas shown in PREPARE DISHWASHER
ENCLOSURE for the drain hose connection. The hole
should be smooth with no sharp edges.
18"
Min.
Min.
IMPORTANT – When connecting
Tip: Avoid unnecessary service call charges.
Always be sure disposer drain plug has been removed
before attaching dishwasher drain hose to the disposer.
drain line to disposer, check to be sure
Remove
Drain
that drain plug has been removed.
DISHWASHER WILL NOT DRAIN IF
Plug
PLUG IS LEFT IN PLACE.
3
| General | Details |
|---|---|
| Name | GE APPLIANCES GSD2100VBB Dishwasher |
| Make | GE Appliances |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.86 MB |
(1 votes, average: 5.00 out of 5)
Loading...
GE APPLIANCES GTW845 Dishwasher
GE APPLIANCES GDF550PGR Plastic Interior Dishwasher with Front Controls
GE APPLIANCES PDT755SYV/BTV UltraFresh System Dishwasher with Interior
GE APPLIANCES GDT670SGV Interior Dishwasher with Hidden Controls
GE APPLIANCES GDT650SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES PDP715SYVFS GE Profile Series Interior Dishwasher
GE APPLIANCES PDT715SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES PDT705SYWFS Dishwasher
GE APPLIANCES GDT565HSYSS Energy Star Hybrid Tub Dishwasher
GE APPLIANCES GD*650-670 Series Interior Dishwasher
Kenmore 587.141500 Dishwasher
Thermador DWHD640EFP Dishwasher
Haier HDW13F0W1 Hygiene Dishwasher
SIEMENS 9001881808 Fully Iintegrated Dishwasher
MORRIS TTS-55065D Tabletop Dishwasher
BOSCH SMS4HAW40G Dishwasher
FISHER AND PAYKEL DW60UC4X2 Contemporary Built Under Dishwasher
centerline CDH-1 51 Racks Hour Door Type Dishwasher
FISHER PAYKEL HDW13V1W1 Dishwasher
BOSCH SPS2IKW01G Dishwasher