Home > INDESIT > INDESIT I0F D641A X Free Standing Dishwasher

INDESIT I0F D641A X Free Standing Dishwasher

OPTIONS AND FUNCTIONS  
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).  
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly  
3 times and beeps will sound. The option will not be enabled.  
MULTIZONE  
DELAY  
If there are not many dishes to be washed, a half loading may  
be used in order to save water, electricity and detergent.  
Select the program and then press the MULTIZONE button:  
the indicator over the button lights up and the symbol of the  
chosen rack will appear on the display. By default the appliance  
washes dishes in all racks.  
The start of the program may be delayed for a period of time  
between 0:30 and 24 hours.  
1. Select the program and any desired options. Press the DE-  
LAY button (repeatedly) to delay the start of the program.  
Adjustable from 0:30 to 24 hours. With each press of the  
button, the delay start increases by: 0:30 if selection below  
4 hours, 1:00 if selection is below 12 hours, 4 hours if selec-  
tion is above 12 hours. If 24 hours reached, and the button  
is pressed, the delayed start is deactivated.  
2. Press the START/PAUSE button: the timer will begin counting  
down;  
3. Once this time has elapsed, the indicator light switches off  
and the program begins automatically.  
To wash only the specific rack, press this button repeatedly:  
shown on the display (only lower rack)  
shown on the display (only upper rack)  
shown on the display (only cutlery rack)  
shown on the display (option is OFF and the appliance will  
wash dishes in all racks).  
If at the time of the countdown the START/PAUSE button is  
pressed again the DELAY option is cancelled and the selected  
program starts automatically.  
Remember to load the upper or lower rack only, and to  
reduce the amount of detergent accordingly.  
The DELAY function cannot be set once a program has  
been started.  
If upper rack is removed, please apply detergent directly  
to tub instead of detergent dispenser.  
TABLET (Tab)  
DRAIN OUT  
This setting allows you to optimize the performance of the  
program according to the type of detergent used.  
A long press (for 3 seconds) of the MULTIZONE button (the  
corresponding symbol will light up), will activate the function  
if you use combined detergents in tablet form (rinse aid, salt  
and detergent in 1 dose).  
To stop and cancel the active cycle, the Drain Out function can  
be used.  
A long press of START/PAUSE button, will activate the DRAIN  
OUT function.The active program will be stopped and the water  
in the dishwasher will be drained out.  
If you use powder or liquid detergent, this option should  
be off.  
AUTO DOOR  
Auto Door is a convection drying system which automat-  
ically opens the door during/after drying phase to ensure  
exceptional drying performance every day. Door opens at the  
temperature that is safe to your kitchen furniture.  
WATER TAP CLOSED – Alarm  
Flashes when there is no inlet water or water tap is closed.  
As additional steam protection, special designed protection foil is added  
together with the dishwasher (depending on the model type - can be  
the need to buy it). To see how to mount protection foil please refer to  
(INSTALLATION GUIDE).  
Auto Door functionality could be disabled by the user as follows:  
• To DISABLE: Switch On, then switch Off. Keep the P button pressed for  
5 sec., at the end of 5 sec the dishwasher plays a short beep. Switch  
On the machine, the display showsoOF.  
PUSH&GO  
Push&GO button is an easily distinguishable button that allows  
you direct access to the Push&GO program, a wash and dry cycle  
that ensures great cleaning performance in a short time. You  
don’t have to worry which program to choose, Push&GO cycle  
will do the work for you.  
To select Push&GO program, switch on appliance, press only  
Push&GO button for 3 seconds.  
• To ENABLE: Switch On, then switch Off the machine. Keep the P but-  
ton pressed for 5 sec., at the end of 5 sec the dishwasher plays a short  
beep. Switch On the machine, the display showsoOn.  
4
GeneralDetails
NameINDESIT I0F D641A X Free Standing Dishwasher
MakeINDESIT
LanguageEnglish
FiletypePDF (Download)
File size15.94 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
INDESIT D2I HL326 Full Size Dishwasher
INDESIT D2I HL326 Full Size Dishwasher
Indesit D2F HD624 A Separate Dishwasher
Indesit D2F HD624 A Separate Dishwasher
Indesit 869991713220 Dishwasher
Indesit 869991713220 Dishwasher
Indesit I0F D641A Dishwasher
Indesit I0F D641A Dishwasher
INDESIT DFE 1B19 14 Dishwasher
INDESIT DFE 1B19 14 Dishwasher
INDeSIT D2F Dishwasher
INDeSIT D2F Dishwasher
INDeSIT D2I HD524 A Dishwasher
INDeSIT D2I HD524 A Dishwasher
INDESIT W11667630 B Dishwasher
INDESIT W11667630 B Dishwasher
InDeSIT IN2FE10CS90S Dishwasher
InDeSIT IN2FE10CS90S Dishwasher
inDeSIT DSIO3M24CS Dishwasher
inDeSIT DSIO3M24CS Dishwasher

INDESIT I0F D641A X Free Standing Dishwasher